Skip to main content
User Image

Husain Abbas

Professor

Ph.D.

كلية الهندسة
1A65, Department of Civil Engineering, King Saud University
publication
Journal Article

Papers published in Journals (132 papers)

  1. Al-Salloum, Y., Alaoud, L., Elsanadedy, H., Albidah, A., Almusallam, T., & Abbas, H. (2022). Bond Performance of GFRP Bar-Splicing in Reinforced Concrete Beams. Journal of Composites for Construction, 26(2), 04022006
  2. Salah, A., Elsanadedy, H., Abbas, H., Almusallam, T., & Al-Salloum, Y. (2022). Behavior of axially loaded L-shaped RC columns strengthened using steel jacketing. Journal of Building Engineering, 103870. 15.4.2022
  3. Albidah, A., Alqarni, A. S., Abbas, H., Almusallam, T., & Al-Salloum, Y. (2022). Behavior of Metakaolin-Based geopolymer concrete at ambient and elevated temperatures. Construction and Building Materials, 317, 125910. 24.1.2022
  4. Alqarni, A. S., Abbas, H., Al-Shwikh, K. M., & Al-Salloum, Y. A. (2021). Treatment of recycled concrete aggregate to enhance concrete performance. Construction and Building Materials, 307, 124960. 8.11.2021
  5. Abbas, H., Siddiqui, N. A., Khateeb, B. M., Almusallam, T. H., Al-Salloum, Y. A. (2021). Performance of new CFST square column-to-foundation connections for cyclic loads. Journal of Constructional Steel Research 185, 106868. 1.10.2021
  6. Abadel, A., Elsanadedy, H., Almusallam, T., Alaskar, A., Abbas, H., Al-Salloum, Y. (2021) Residual compressive strength of plain and fiber reinforced concrete after exposure to different heating and cooling regimes. European Journal of Environmental and Civil Engineering,
  7. Alrshoudi, F., Abbas, H., Abadel, A., Altheeb, A., Albidah, A., Al-Salloum, Y. (2021). Compression Behavior and Modeling of FRP-Confined High Strength Geopolymer Concrete. Construction and Building Materials, 283, 122759.
  8. Abadel, A.A., Albidah, A.S., Altheeb, A.H., Alrshoudi, F.A., Abbas, H., Al-Salloum, Y.A. (2021). Effect of molar ratios on strength, microstructure & embodied energy of metakaolin geopolymer. Advances in Concrete Construction, 11(2), 127-140.
  9. Abbas, H., Siddiqui, N. A., Almusallam, T. H., Abadel, A. A., Elsanadedy, H., & Al-Salloum, Y. A. (2021). Effect of rebar spacing on the behavior of concrete slabs under projectile impact. Structural Engineering and Mechanics, 77(3), 329-342.
  10. Elsanadedy, H., Alrubaidi, M., Abbas, H., Almusallam, T., & Al-Salloum, Y. (2021). Progressive collapse risk of 2D and 3D steel-frame assemblies having shear connections. Journal of Constructional Steel Research, 179, 106533.
  11. Albidah, A., Alghannam, M., Abbas, H., Almusallam, T., & Al-Salloum, Y. (2021). Characteristics of Metakaolin-Based Geopolymer Concrete for Different Mix Design Parameters. Journal of Materials Research and Technology, 10, 84-98.
  12. Elsanadedy, H. M., Abbas, H., Almusallam, T. H., & Al-Salloum, Y. A. (2021). Hybrid UHPC/NSM CFRP strips vs. traditional systems for flexural upgrading of RC beams–Experimental and FE study. Composite Structures, 113291.
  13. Almajed, A., Abbas, H., Almusallam, T., & Al-Salloum, Y. (2021). Stabilization of sand using energy efficient materials under normal and extreme hot weathers. Journal of Cleaner Production, 285, 124914.
  14. Elsanadedy, H. M., Al-Salloum, Y. A., Alrubaidi, M. A., Almusallam, T. H., Siddiqui, N. A., & Abbas, H. (2021). Upgrading of precast RC beam-column joints using innovative FRP/steel hybrid technique for progressive collapse prevention. Construction and Building Materials, 121130.
  15. Elsanadedy, H. M., Al-Salloum, Y. A., Alrubaidi, M. A., Almusallam, T. H., & Abbas, H. (2021). Finite element analysis for progressive collapse potential of precast concrete beam-to-column connections strengthened with steel plates. Journal of Building Engineering, 34, 101875.
  16. Alghannam, M., Albidah, A., Abbas, H., & Al-Salloum, Y. (2021). Influence of critical parameters of mix proportions on properties of MK-based geopolymer concrete. Arabian Journal for Science and Engineering, 46(5), 4399-4408.
  17. Khan, M. S., Almutairi, S., & Abbas, H. (2021). Mechanical properties of concrete subjected to cyclic thermal loading. European Journal of Environmental and Civil Engineering, 1-14.
  18. Alaoud L., Y. Al-Salloum, H. Abbas (2021). Experimental Investigation for GFRP rebar Couplers for Reinforced Concrete. Journal of King Saud University-Engineering Sciences, 33(2), 104-110.
  19. Abadel, A., Abbas, H., Alrshoudi, F., Altheeb, A., Albidah, A., & Almusallam, T. (2020, December). Experimental and analytical investigation of fiber alignment on fracture properties of concrete. In Structures (Vol. 28, pp. 2572-2581). Elsevier.
  20. Albidah, A., Abadel, A., Alrshoudi, F., Altheeb, A., Abbas, H., Al-Salloum, Y. (2020). Bond strength between concrete substrate and metakaolin geopolymer repair mortars at ambient and elevated temperatures. Journal of materials Research and Technology, 9(5), 10732-10745.
  21. Albidah, A., Altheeb, A., Alrshoudi, F., Abadel, A., Abbas, H., Al-Salloum, Y. (2020). Bond performance of GFRP and steel rebars embedded in metakaolin based geopolymer concrete. Structures, 27, 1582-1593. Elsevier.
  22. Almajed, A., Abbas, H., Arab, M., Alsabhan, A., Hamid, W., & Al-Salloum, Y. (2020). Enzyme-Induced Carbonate Precipitation (EICP)-Based Methods for Ecofriendly Stabilization of Different Types of Natural Sands. Journal of Cleaner Production, 274, 122627.
  23. Khateeb, B. M., Siddiqui, N. A., Almusallam, T. H., Abbas, H., & Al-Salloum, Y. A. (2020). Behavior of novel CFST circular column-to-foundation connections under cyclic loading. Engineering Structures, 221, 111051.
  24. Alrubaidi, M., Elsanadedy, H., Abbas, H., Almusallam, T., & Al-Salloum, Y. (2020). Investigation of different steel intermediate moment frame connections under column-loss scenario. Thin-Walled Structures154, 106875.
  25. N. Siddiqui, H. Abbas, T. Almusallam, A. Binyahya, Y. Al-Salloum (2020). Compression behavior of FRP-strengthened RC square columns of varying slenderness ratios under eccentric loading. Journal of Building Engineering, 101512 
  26. S. Pal, M. Shariq, H. Abbas, A.K. Pandit, A. Masood (2020). Strength characteristics and microstructure of hooked-end steel fiber reinforced concrete containing fly ash, bottom ash and their combination. Construction and Building Materials, 247, 118530 
  27. Tarek Almusallam, Yousef Al-Salloum, Hussein Elsanadedy, Tuan Ngo, Priyan Mendis, Husain Abbas (2020). Development limitations of compressive arch and catenary actions in reinforced concrete special moment resisting frames under column-loss scenarios. Structures and Infrastructure Engineering, 16(12), 1616-1634 
  28. Elsanadedy, H. M., Al-Salloum, Y. A., Almusallam, T. H., Ngo, T., Abbas, H. (2019). Assessment of progressive collapse potential of special moment resisting RC frames–Experimental and FE study. Engineering Failure Analysis, 105, 896-918. 
  29. Elsanadedy, H. M., Abbas, H., Almusallam, T. H., & Al-Salloum, Y. A. (2019). Organic versus inorganic matrix composites for bond-critical strengthening applications of RC structures–State-of-the-art review. Composites Part B: Engineering, 106947. 
  30. Abdulrahman Albidah, Aref Abadel, Husain Abbas, Tarek Almusallam, Yousef Al-Salloum (2019) Experimental and Analytical Study of Strengthening Schemes for Shear Deficient RC Deep Beams, Construction and Building Materials, 216, 673-686. 
  31. M Shariq, Husain Abbas, J Prasad (2019) “Effect of magnitude of sustained loading on the long-term deflection of RC beams”, Archives of Civil and Mechanical Engineering, 19(3), 779–791. 
  32. Husain Abbas, Yousef Al-Salloum, Hussein Elsanadedy, Tarek Almusallam (2019) “ANN models for prediction of residual strength of HSC after exposure to elevated temperature”, Fire Safety Journal, 106, 13–28. 
  33. Hussein Elsanadedy, Yousef Al-Salloum, Tarek Almusallam, Abdulhafiz Alshenawy, Husain Abbas, (2019), “Experimental and numerical study on FRP-upgraded RC beams with large rectangular web openings in shear zones”, Construction and Building Materials, 194, 322–343. 
  34. N Siddiqui, Y Al-Salloum, T Almusallam, A Abadel, H Abbas (2018). Reliability Assessment of HFRC Slabs Against Projectile Impact. International Journal of Concrete Structures and Materials, 12:58, pp. 1-11.
  35. Y Al-Salloum, G Al-Amri, N Siddiqui, T Almusallam, H Abbas (2018). Effectiveness of CFRP Strengthening in Improving Cyclic Compression Response of Slender RC Columns. Journal of Composites for Construction, 22(3): 04018009.
  36. Y Al-Salloum, S Hadi, H Abbas, T Almusallam, MA Moslem (2017). Bio-induction and bioremediation of cementitious composites using microbial mineral precipitation – A review. Construction and Building Materials,  154, 857–87.
  37. H Elsanadedy, T Almusallam, Y Al-Salloum, H Abbas (2017). Investigation of precast RC beam-column assemblies under column-loss scenario. Construction and Building Materials, 142, 552–571.
  38. T Almusallam, Y Al-Salloum, T Ngo, P Mendis, H Abbas (2017). Experimental investigation of progressive collapse potential of ordinary and special moment-resisting reinforced concrete frames. Materials and Structures, 50:137.
  39. Y Al-Salloum, H Abbas, QI Sheikh, S Hadi, S Alsayed, T Almusallam (2017). Effect of some biotic factors on microbially-induced calcite precipitation in cement mortar. Saudi Journal of Biological Sciences 24(2), 286–294.
  40. M Shariq, H Abbas, J Prasad (2017). Effect of GGBFS on time-dependent deflection of RC beams. Computers and Concrete, 19(1), 51-58.
  41. H Abbas, Y Al-Salloum, S Alsayed, M Alhaddad, R Iqbal (2017). Post-heating response of concrete-filled circular steel columns. KSCE Journal of Civil Engineering, 21(4), 1-12.
  42. MS Morsy, YA Al-Salloum, TH Almusallam, H Abbas (2017). Mechanical properties, phase composition and microstructure of activated Metakaolin-slaked lime binder. KSCE Journal of Civil Engineering 21(3), 863–871.
  43. Husain Abbas, Tarek Almusallam, Yousef Al-Salloum, Nadeem Siddiqui (2017). “Prediction of ejected mass from hybrid-fiber reinforced concrete slabs subjected to impact loads”, Procedia Engineering 173: 77–84.
  44. Aref Abadel, Husain Abbas, Tarek Almusallam, Yousef Al-Salloum, Nadeem Siddiqui (2017). “Local impact damage response of CFRP-strengthened RC slabs”, Procedia Engineering 173: 85–92.
  45. Y.A. Al-Salloum, H. Abbas, T.H. Almusallam, T. Ngo, P. Mendis (2017). Progressive Collapse Analysis of a Typical RC High-Rise Tower. Journal of King Saud University - Engineering Sciences 29(4): 313-320.
  46. M Shariq, J Prasad, H Abbas (2016). Creep and drying shrinkage of concrete containing GGBFS. Cement and Concrete Composites 68, 35-45.
  47. SM Ibrahim, TH Almusallam, YA Al-Salloum, AA Abadel, H Abbas (2016). Strain Rate Dependent Behavior and Modeling for Compression Response of Hybrid Fiber Reinforced Concrete. Latin American Journal of Solids and Structures 13(9), 1695-1715.
  48. A Abadel, H Abbas, T Almusallam, Y Al-Salloum, N Siddiqui, MA Shubaili, ... (2016) Discussion: Mechanical properties of hybrid fibre-reinforced concrete-analytical modelling and experimental behaviour. Magazine of Concrete Research 68(22), 1183-1186.
  49. SH Alsayed, HM Elsanadedy, ZM Al-Zaheri, YA Al-Salloum, H Abbas (2016). Blast response of GFRP-strengthened infill masonry walls. Construction and Building Materials 115, 438-451.  
  50. HM Elsanadedy, YA Al-Salloum, ZM Al-Zaheri, SH Alsayed, H Abbas (2016). Behavior and Design Aspects of FRP-Strengthened URM Walls under Out-of-Plane Loading. Journal of Composites for Construction 20(6), pp. 1-16, 04016048.
  51. T Almusallam, SM Ibrahim, Y Al-Salloum, A Abadel, H Abbas (2016). Analytical and experimental investigations on the fracture behavior of hybrid fiber reinforced concrete. Cement and Concrete Composites 74, 201-217.
  52. HM Elsanadedy, H Abbas, YA Al-Salloum, TH Almusallam (2016). Shear strength prediction of HSC slender beams without web reinforcement. Materials and Structures 49(9), 3749-3772.
  53. A Abadel, H Abbas, T Almusallam, Y Al-Salloum, N Siddiqui (2016). Mechanical properties of hybrid fibre-reinforced concrete–analytical modelling and experimental behaviour. Magazine of Concrete Research 68(16), 823-843.
  54. ZI Baig, SH Alsayed, H Abbas (2016). Punching of slab–column connections strengthened using external steel shear bolts. Magazine of Concrete Research 68(2), 55-68.
  55. MS Khan, H Abbas (2016). Performance of concrete subjected to elevated temperature. European Journal of Environmental and Civil Engineering 20(5), 532-543.
  56. TH Almusallam, AA Abadel, YA Al-Salloum, NA Siddiqui, H Abbas (2015). Effectiveness of hybrid-fibers in improving the impact resistance of RC slabs. International Journal of Impact Engineering 81, 61-73.
  57. Y Al-Salloum, T Almusallam, SM Ibrahim, H Abbas, S Alsayed (2015). Rate dependent behavior and modeling of concrete based on SHPB experiments. Cement and Concrete Composites 55, 34-44.
  58. T Almusallam, Y Al-Salloum, S Alsayed, R Iqbal, H Abbas (2015). Effect of CFRP strengthening on the response of RC slabs to hard projectile impact. Nuclear Engineering and Design 286, 211-226.
  59. MS Alhaddad, KM Wazira, YA Al-Salloum, H Abbas (2015). Ductility damage indices based on seismic performance of RC frames. Soil Dynamics and Earthquake Engineering 77, 226-237.
  60. H Abbas, AA Abadel, T Almusallam, Y Al-Salloum (2015). Effect of CFRP and TRM strengthening of RC slabs on punching shear strength. Latin American Journal of Solids and Structures 12(9), 1616-1640.
  61. MS Khan, H Abbas (2015). Effect of elevated temperature on the behavior of high volume fly ash concrete. KSCE Journal of Civil Engineering 19(6), 1825-1831.
  62. HM Elsanadedy, H Abbas, YA Al-Salloum, TH Almusallam (2015). Closure to: Prediction of intermediate crack debonding strain of externally bonded FRP laminates in RC beams and one-way slabs. Journal of Composites for Construction, ASCE 19(2), 07014004.
  63. YA Al-Salloum, TH Almusallam, MY Khawaji, T Ngo, HM Elsanadedy, H. Abbas (2015). Progressive collapse analysis of RC Buildings against Internal Blast. Advances in Structural Engineering 18(12), 2181-2192.
  64. MS Morsy, Y Al-Salloum, T Almusallam, H Abbas (2014). Effect of nano-metakaolin addition on the hydration characteristics of fly ash blended cement mortar. Journal of Thermal Analysis and Calorimetry 116(2), 845-852.
  65. HM Elsanadedy, TH Almusallam, YR Alharbi, YA Al-Salloum, H Abbas (2014). Progressive collapse potential of a typical steel building due to blast attacks. Journal of Constructional Steel Research 101, 143-157.
  66. NA Siddiqui, BMA Khateeb, TH Almusallam, YA Al-Salloum, RA Iqbal, H. Abbas (2014). Reliability of RC shielded steel plates against the impact of sharp nose projectiles. International Journal of Impact Engineering 69, 122-135.
  67. NA Siddiqui, SH Alsayed, YA Al-Salloum, RA Iqbal, H Abbas (2014). Experimental investigation of slender circular RC columns strengthened with FRP composites. Construction and Building Materials 69, 323-334.
  68. HM Elsanadedy, H Abbas, YA Al-Salloum, TH Almusallam (2014). Prediction of intermediate crack debonding strain of externally bonded FRP laminates in RC beams and one-way slabs. Journal of Composites for Construction 18(5), 04014008.
  69. SH Alsayed, TH Almusallam, SM Ibrahim, NM Al-Hazmi, YA Al-Salloum, H. Abbas (2014). Experimental and numerical investigation for compression response of CFRP strengthened shape modified wall-like RC column. Construction and Building Materials 63, 72-80.
  70. SM Ibrahim, SH Alsayed, H Abbas, E Carrera, YA Al-Salloum, TH Almusallam (2014). Free vibration of tapered beams and plates based on unified beam theory. Journal of Vibration and Control 20(16), 2450-2463.
  71. NA Siddiqui, BMA Khateeb, TH Almusallam, H Abbas (2014). Reliability of double-wall containment against the impact of hard projectiles. Nuclear Engineering and Design 270, 143-151.
  72. Y Al-Salloum, S Alsayed, T Almusallam, SM Ibrahim, H Abbas (2014). Investigations on the influence of radial confinement in the impact response of concrete. Computers and Concrete 14(6), 675-694.
  73. H Abbas, T Almusallam, Y Al-Salloum (2014). Improving the impact resistance of reinforced concrete. Advanced Materials Research 919, 1924-1929.
  74. SM Ibrahim, YA Al-Salloum, H Abbas (2014). Dynamic analysis of tapered plates based on higher order beam theory. Advanced Materials Research 919, 79-82.
  75. JN Akhtar, T Ahmad, MN Akhtar, H Abbas (2014). Influence of fibers and fly ash on mechanical properties of concrete. American Journal of Civil Engineering and Architecture 2(2), 64-69.
  76. TH Almusallam, NA Siddiqui, RA Iqbal, H Abbas (2013). Response of hybrid-fiber reinforced concrete slabs to hard projectile Impact. International Journal of Impact Engineering 58, 17-30.
  77. F Mahdi, H Abbas, AA Khan (2013). Flexural, shear and bond strength of polymer concrete utilizing recycled resin obtained from post consumer PET bottles. Construction and Building Materials 44, 798-811.
  78. M Shariq, J Prasad, H Abbas (2013). Effect of GGBFS on age dependent static modulus of elasticity of concrete. Construction and Building Materials 41, 411-418.
  79. M Khan, J Prasad, H Abbas (2013). Effect of high temperature on high-volume fly ash Concrete. Arabian Journal for Science & Engineering 38(6), 369–1378.
  80. M Hosseini, H Abbas (2013). Strain hardening in M–P interaction for metallic beam of I-section. Thin-Walled Structures 62, 243-256.
  81. MS Khan, J Prasad, H Abbas (2013). Bond strength of RC beams subjected to cyclic thermal loading. Construction and Building Materials 38, 644-657.
  82. M Shariq, J Prasad, H Abbas (2013). Long-term deflection of RC beams containing GGBFS. Magazine of Concrete Research 65(24), 1441-1462.
  83. MS Morsy, YA Al-Salloum, H Abbas, SH Alsayed (2012). Behavior of blended cement mortars containing nano-metakaolin at elevated temperatures. Construction and Building materials 35, 900-905.
  84. HM Elsanadedy, YA Al-Salloum, H Abbas, SH Alsayed (2012). Prediction of strength parameters of FRP-confined concrete. Composites Part B: Engineering 43(2), 228-239.
  85. AA Shah, SH Alsayed, H Abbas, YA Al-Salloum (2012). Predicting residual strength of non-linear ultrasonically evaluated damaged concrete using artificial neural network. Construction and Building Materials 29, 42-50.
  86. H Abbas, N Jones (2012). Influence of strain hardening on bending moment–axial force interaction. International Journal of Mechanical Sciences 55(1), 65-77.
  87. M Hosseini, H Abbas (2012). Neural network approach for prediction of deflection of clamped beams struck by a mass. Thin-Walled Structures 60, 222-228.
  88. YA Al-Salloum, AA Shah, H Abbas, SH Alsayed, TH Almusallam, MS Al-Haddad (2012). Prediction of compressive strength of concrete using neural networks. Computers and Concrete 10(2), 197-217.
  89. HM Elsanadedy, TH Almusallam, H Abbas, YA Al-Salloum, SH Alsayed (2011). Effect of blast loading on CFRP-Retrofitted RC columns-a numerical study. Latin American Journal of Solids and Structures 8(1), 55-81.
  90. H Abbas, SH Alsayed, TH Almusallam, YA Al-Salloum (2011). Characterization of hole-diameter in thin metallic plates perforated by spherical projectiles using genetic algorithms. Archive of Applied Mechanics 81(7), 907-924.
  91. IK Khan, H Abbas (2011). Static and dynamic response of cost effective unreinforced brick masonry buildings. Archives of Civil and Mechanical Engineering 11(4), 921-941.
  92. H Abbas, YA Al-Salloum, SH Alsayed, HM Elsanadedy, RI Iqbal (2011). Numerical study for retrofitting of RC columns for blast loading. New Building Materials and Construction World, June 2011, Article No. 23886.
  93. TH Almusallam, HM Elsanadedy, H Abbas, T Ngo, P Mendis (2010). Numerical analysis for progressive collapse potential of a typical framed concrete building. International Journal of Civil & Environmental Engineer 10(2), 40-46.
  94. NA Siddiqui, H Abbas, IA Makrani (2010). A simplified procedure for reliability assessment of thin circular tubes against axial crushing. Journal of Modeling and Simulation in Design and Manufacturing, India 1(2), 58-66.
  95. SH Alsayed, H Abbas, YA Al-Salloum (2010). Numerical study for CFRP strengthening of RC columns for blast resistance. World Journal of Engineering 7(3), 55-56.
  96. F Mahdi, H Abbas, AA Khan (2010). Strength characteristics of polymer mortar and concrete using different compositions of resins derived from post-consumer PET bottles. Construction and Building Materials 24(1), 25-36.
  97. TH Almusallam, HM Elsanadedy, H Abbas, SH Alsayed, YA Al-Salloum (2010). Progressive collapse analysis of a RC building subjected to blast loads. Structural Engineering and Mechanics 36(3), 301-319.
  98. MS Khan, J Prasad, H Abbas (2010). Shear strength of RC beams subjected to cyclic thermal loading. Construction and Building Materials 24(10), 1869-1877.
  99. M Hosseini, H Abbas, NK Gupta (2009). Change in thickness in straight fold models for axial crushing of thin-walled frusta and tubes. Thin-Walled Structures 47(1), 98-108.
  100. M Shariq, H Abbas, H Irtaza, M Qamaruddin (2008). Influence of openings on seismic performance of masonry building walls. Building and Environment 43(7), 1232-1240.
  101. MN Mannan, R Ansari, H Abbas (2008). Failure of aluminium beams under low velocity impact. International Journal of Impact Engineering 35(11), 1201-1212.
  102. M Hosseini, H Abbas (2008). Neural network approach for estimation of hole-diameter in thin plates perforated by spherical projectiles. Thin-Walled Structures 46(6), 592-601.
  103. MA Khan, A Usmani, SS Shah, H Abbas (2008). A study of multilayer soil-fly ash layered system under cyclic loading. International Journal of Civil Engineering 6(2).
  104. M Hosseini, H Abbas (2008). Neural network approach for failure analysis of rectangular plates under wedge impact. Latin American Journal of Solids and Structures 5(3), 171-186.
  105. F Mahdi, AA Khan, H Abbas (2007). Physiochemical properties of polymer mortar composites using resins derived from post-consumer PET bottles. Cement and concrete composites 29(3), 241-248.
  106. M Hosseini, H Abbas (2006). Growth of hole in thin plates under hypervelocity impact of spherical projectiles. Thin-walled structures 44(9), 1006-1016.
  107. A Masood, H Abbas, M Arif, SA Khan and M Haquie (2006). Waste utilization in recycled concrete. Journal of Structural Engineering 33(3), 243-246.
  108. NK Gupta, H Abbas, M Hosseini (2006). Axi-Symmetric Crushing of Thin Walled Frusta and Tubes. Proceedings of the National Academy of Sciences, India Section A: Physical Sciences (Then Proceedings-Indian National Science Academy) 72(1), 49-54.
  109. M Hosseini, H Abbas, NK Gupta (2006). Straight fold analysis for axisymmetric crushing of thin walled frusta and tubes. Latin American Journal of Solids and Structures 3(4), 345-360.
  110. NA Siddiqui, S Kumar, MA Khan, H Abbas (2006). A simplified procedure to incorporate soil non-linearity in missile penetration problems. Structural Engineering and Mechanics 23(3), 249-262.
  111. NK Gupta, H Abbas, Venkatesh (2005). Considerations in straight fold analysis of thin tubes under axial compression. International journal of impact engineering 31(8), 1039-1053.
  112. H Abbas, NK Gupta, M Alam (2004). Nonlinear response of concrete beams and plates under impact loading. International Journal of Impact Engineering 30(8), 1039-1053.
  113. BL Tyagi, H Abbas, M Arif, NK Gupta (2004). Change in thickness in curved fold model for axial crushing of tubes. International journal of solids and structures 41(24), 7129-7153.
  114. MA Khan, NA Siddiqui, H Abbas (2004). Reliability analysis of latticed steel towers against wind induced displacement. Steel and Composite Structures 4(1), 9-21.
  115. H Abbas, BL Tyagi, M Arif, NK Gupta (2003). Curved fold model analysis for axi-symmetric axial crushing of tubes. Thin-walled structures 41(7), 639-661.
  116. NA Siddiqui, MA Iqbal, H Abbas, DK Paul (2003). Reliability analysis of nuclear containment without metallic liners against jet aircraft crash. Nuclear engineering and design 224(1), 11-21.
  117. U Khan, NA Siddiqui, A Umar, H Abbas (2003). Local damage of plain and reinforced concrete targets under impact load. Defence Science Journal 53(1), 67-73.
  118. MMA Khan, H Abbas, NK Gupta (2003). Analysis of Axisymmetric Crushing of Frusta. Defence Science Journal 53(1), 41-50.
  119. MA Choudhury, NA Siddiqui, H Abbas (2002). Reliability analysis of a buried concrete target under missile impact. International journal of impact engineering 27(8), 791-806.
  120. NA Siddiqui, MA Choudhury, H Abbas (2002). Reliability analysis of projectile penetration into geological targets. Reliability Engineering & System Safety 78(1), 13-19.
  121. M Amanullah, NA Siddiqui, A Umar, H Abbas (2002). Fatigue reliability analysis of welded joints of a TLP tether system. Steel and Composite Structures 2(5), 331-354.
  122. NA Siddiqui, H Abbas (2002). Mechanics of missile penetration into geo-materials. Structural Engineering and Mechanics 13(6), 639-652.
  123. NK Gupta, H Abbas (2001). Some considerations in axisymmetric folding of metallic round tubes. International journal of impact engineering 25(4), 331-344.
  124. NK Gupta, H Abbas (2000). Lateral collapse of composite cylindrical tubes between flat platens. International Journal of Impact Engineering 24(4), 329-346.
  125. NK Gupta, H Abbas (2000). Mathematical modeling of axial crushing of cylindrical tubes. Thin-walled structures 38(4), 355-375.
  126. NK Gupta, H Abbas (2000). Axisymmetric axial crushing of thin frusta. Thin-walled structures 36(3), 169-179.
  127. H Abbas, DK Paul, PN Godbole, GC Nayak (1996). Aircraft crash upon outer containment of nuclear power plant. Nuclear Engineering and Design 160(1-2), 13-50.
  128. A Umar, H Abbas, A Qadeer, DK Sehgal (1996). Prediction of error in finite element results. Computers & structures 60(3), 471-480.
  129. H Abbas, DK Paul, PN Godbole, GC Nayak (1995). Soft missile impact on rigid targets. International journal of impact engineering 16(5-6), 727-737.
  130. H Abbas, DK Paul, PN Godbole, GC Nayak (1995). Reaction-time response of aircraft crash. Computers & structures 55(5), 809-817.
  131. N Islam, H Abbas, PC Jain (1994). A computer-oriented procedure for the yield line analysis of slabs. Computers & structures 52(3), 419-430.
  132. S Ahmad, VP Mital, F Ghani, H Abbas (1987). Discussion: Mechanics of masonry in compression. Journal of Structural Engineering 113(1), 190-191.
more of publication
publications
  1. Husain Abbas, Yousef A. Al-Salloum, Saleh H. Alsayed, Mohammad S. Alhaddad, “System for improving fire endurance of concrete-filled steel tubular columns”, US Patent US 8,484…
publications

Published more than 75 papers in conference proceedings

publications
  1. Al-Salloum, Y., Alaoud, L., Elsanadedy, H., Albidah, A., Almusallam, T., & Abbas, H. (2022). Bond Performance of GFRP Bar-Splicing in Reinforced Concrete Beams. Journal…