User Image

Prof. Emad S. Abouel Nasr

Professor

Professor of Industrial Engineering

كلية الهندسة
College of Engineering, IE Department, Room 2A117/1

4670639
eabdelghany@ksu.edu.sa
cv

CV

Bio
Emad S. Abouel Nasr is a Professor in Industrial Engineering Department, College of Engineering, King Saud University, Saudi Arabia, and Mechanical Engineering Department, Faculty of Engineering, Helwan University, Egypt. He received his PhD in Industrial Engineering from University of Houston, TX, USA, in 2005. His current research focuses on CAD, CAM, rapid prototyping, advanced manufacturing systems, supply chain management and collaborative engineering.
CV Text

Emad Abouel Nasr

Professor
College of Engineering
Industrial Engineering Department, King Saud University
Date of Birth: 14 - 4- 1969
E-mail:  eabdelghany@ksu.edu.sa

and
Professor, Industrial Engineering Division
Faculty of Engineering-Helwan
Mechanical Engineering Department
Helwan University, Cairo, Egypt
E-mail:  emadsamir60@yahoo.com
Phone: +2 01001419657

  

EDUCATION             

Dissertation Title: A Feature-Based Methodology for Integrating Design and Manufacturing, GPA: (4.0/4.0).

  • M.SC., University of Helwan, Cairo, Egypt, Department of Production Engineering, 1997.

Thesis Title: Development of a Heuristic Technique to Solve Sequencing Problems with Limited Buffer Storage

  • B.S., University of Helwan, Cairo, Egypt, Department of Production Engineering, 1992. GPA: ranked at the top 1st place of the whole school.

 
PROFESSIONAL EXPERIENCE    

  • Professor, Faculty of Engineering, Industrial Engineering Department, King Saud University, 2017-Present.
  • Professor, Industrial Engineering, Faculty of Engineering-Helwan, Mechanical Engineering Department, Helwan University, Cairo, Egypt, 2020- Present
  • Associate Professor, Faculty of Engineering, Industrial Engineering Department, King Saud University, 2012-2016.
  • Associate Professor, Faculty of Engineering, Industrial Engineering Department, King Saud University, 2013- 2020.
  • Assistant Professor, Faculty of Engineering, Industrial Engineering Department, King Saud University, 2010-2012.
  • Assistant Professor, Industrial Engineering, Faculty of Engineering-Helwan, Mechanical Engineering Department, Helwan University, Cairo, Egypt, 2006-2010.
  • Instructor, American University in Cairo (AUC), Faculty of Engineering, Mechanical Engineering Department, Fall 2009- present.
  • Instructor, Misr University for Science and Technology, Industrial and Systems Engineering Department, Fall 2009- present.
  • Instructor, Cairo University, Faculty of Engineering, Mechanical and production Department, Academic Year 2008-2009.
  • Instructor, October University for Modern Sciences and Arts (MSA), Faculty of Engineering, Industrial systems Engineering Department, Summer 2007- present.
  • Instructor, Canadian International Collage (CIC), Faculty of Engineering, Manufacturing Department, Fall 2007- present.
  • Research Assistant, Industrial Engineering, University of Houston, TX, USA, (2001- 2006).
  • Teaching Assistant, Industrial Engineering, University of Houston, TX, USA, (Fall 2004 – 2005).
  • Lecturer, Production Engineering, Helwan University, Cairo, Egypt, 1997 – 2001.
  • Instructor, Production Engineering, Helwan University, Cairo, Egypt, 1993 – 1997.
  • Training Internships at Arab British Company for Dynamic Industries, Cairo, Egypt, 1990.
  • Training Internships at Egypt Air Company, Cairo, Egypt, 1990.
  • Training Internships at Jacob Delfon Company, Cairo, Egypt, 1997.

 

RESEARCH INTERESTS

  • Advanced Manufacturing Systems
  • Lean and Agile Manufacturing
  • Product Design Life Cycle
  • Rapid Prototyping and Manufacturing
  • Computer Integrated Manufacturing
  • Operation Research
  • Systems Engineering
  • Cellular Manufacturing

 

TEACHING INTERESTS

  • Manufacturing Systems (KSU)
  • Engineering Management (KSU)
  • Maintenance and Reliability (KSU)
  • Statistical Process Control
  • Reliability and Quality Control.
  • Maintenance Planning and Control
  • Production Planning and Control.
  • Engineering Economics.
  • Engineering Statistics.
  • Work Analysis and Design
  • Product Design and innovation
  • Industrial Facility Design
  • Computer Integrated Manufacturing
  • Operations Research.
  • Experimental Design.
  • Advanced Engineering Statistics.
  • Simulation
  • Manufacturing Processes.
  • Computer Aided Manufacturing.
  • Integrated Product Design.
  • Modern Manufacturing Systems.
  • Work Study and productivity enhancement

 

Training Courses

  • Quality Control in Electrical Products
  • Maintenance and Reliability
  • Production Planning and Control
  • Reliability and Failure Analysis
  • Project Cycle Management
  • Supply Chain Management.
  • The Five Keys to Total Quality Environment (5 S)

 

PUBLISHED BOOKS

  • Ali K. Kamrani and Emad Abouel Nasr (Editors), Rapid Prototyping: Theory and Practice, Springer, 2006.
  • Emad Abouel Nasr and Ali K. Kamrani, Computer-based Design and Manufacturing: An Information-Based Approach, Springer, 2007.
  • Ali K. Kamrani and Emad Abouel Nasr (Editors), Collaborative Engineering: Theory and Practice, Springer, 2008.
  • Ali K. Kamrani and Emad Abouel Nasr, Engineering Design and Rapid Prototyping, Springer, 2010.
  • Abdulrahman Al-Ahmari, Emad Abouel Nasr, Osama Abdulhameed, "Computer-Aided Inspection Planning: Theory and Practice"; CRC Press: Advanced and Additive Manufacturing Series, 2016.
  • Awis Khan, Emad Abouel Nasr, Abdulrahman Al-Ahmari, Syed Mian, " Integrated Process and Fixture Planning Theory and Practice"; CRC Press: Advanced and Additive Manufacturing Series, 2018.

 

BOOK CHAPTERS

  • Emad Abouel Nasr, and Ali K. Kamrani, “IGES Standard Protocol for Feature Recognition CAD System” Rapid Prototyping: Theory and Practice, 2005.
  • Emad Abouel Nasr and Ali K. Kamrani, “Intelligent Design and Manufacturing”, Collaborative Engineering: Theory and Practice, Springer, 2008.
  • Emad Abouel Nasr, Abdulrahman Al-Ahmari, Ali Kamrani, Osama Abdulhameed, "A semi-integration system of CAD and Inspection planning of Standard Manufactured Features", New Product Design: New Strategies for Reengineering, Taylor and Francis, 2013.
  • Abdulaziz M. El-Tamimi, Emad S. Abouel Nasr, Mustufa H. Abid, “Selection of Parameters for CAD-VR Data Translation”, "New Product Design: New Strategies for Reengineering, Taylor and Francis, 2013.
  • Maryam azimi, Emad Abouel Nasr, and Ali Kamrani, “Tumor Geometrical Deformation Modeling”, New Product Design: New Strategies for Reengineering, Taylor and Francis, 2013.
  • Nasr, E. S. A.; Al-Ahmari, A.; Moiduddin, K. CAD Issues in Additive Manufacturing, In Comprehensive Materials Processing; Masood, S., Ed.; Elsevier Ltd., Vol. 10, pp. 375-399, 2014.

 

PUBLICATIONS
REFEREED JOURNALS

  • Pramod S. Kathmore, Bhanudas D. Bachchhav, Duran Kaya, Sachin Salunkhe, Lenka Cepova, Ondřej Mizera, Emad Abouel Nasr, “Analyzing the Efficacy of Trimethylolpropane Trioleate Oil for Predicting Cutting Power and Surface Roughness in High-Speed Drilling of Al-6061 through Machine Learning”, PLOS ONE, December 10, 2024.
  • T. Udhaya Kumar, M. Vinod Kumar, Sachin Salunkhe, Robert Cep, and Emad Abouel Nasr; “Impact of Geopolymer Aggregate on the Mechanical Properties and Durability Characteristics of Concrete”; Frontiers in Built Environment, 13 November 2024.
  • Sunder Jebarose Juliyana, Jayavelu Udaya Prakash, Robert Čep, Charles Sarla Rubi, Sachin Salunkhe, Arasumugam Divya Sadhana, Emad Abouel Nasr; “Taguchi Optimization of Wire EDM Process Parameters for Machining LM5 Aluminium Alloy”, PLOS ONE, October 28, 2024
  • Mathew Alphonse, V. K. Bupesh Raja, Lenka Cepova, Sachin Salunkhe4, Emad Abouel Nasr, and Abdelaty Edrees Abdelgawad, “Tribological and investigation study of a dlc-coated H13 friction drilling tool on AZ31B magnesium alloy”, Frontiers in Mechanical Engineering, Volume 11, 9 October 2024.
  • Nagesh Tambake, Bhagyesh Deshmukh, Sujit Pardeshi, Sachin Salunkhe, Robert Cep and Emad Abouel Nasr; “Condition Monitoring of a CNC Hobbing Cutter Using Machine Learning Approach”, Advances in Mechanical Engineering, Vol. 16(9) 1–14, September 24, 2024.
  • Rania Hasan, Sarang Pande, Pravin Bhalerao, Sachin Salunkhe, Robert Cep, and Emad Abouel Nasr; “Effect of MMT-HNT Hybrid Nanoclay on Properties of UHMWPE Composite”, International Journal of Polymer Science, Volume 2024, 26 September 2024.
  • Anjan Kumar, Emad Abouel Nasr, Emad Mahrous Awwad, Angel Geovanny Guam´an Lozano, Irwanjot Kaur, Pallavi Ghildiyal, Parminder Singh, Julio C´esar Moyano Alulema, “Enhanced optoelectrical properties and stability of solvent-based perovskite solar cells using ellagic acid additives”, Optical Materials, Volume 155, September 2024
  • Mannan Sayyad, Bhanudas Bachchhav, Sachin Salunkhe, Lenka Cepova, Jiri Struz, Emad Abouel Nasr, Khaled M.S. Gad El Mola; “Strength, Stiffness and Stability of Bamboo - Study of Optimal Design of Structures”, Heliyon, Volume 10, ISSUE 16, August 30, 2024.
  • Haitham A. Mahmoud, G. Shanmugasundar, Swapnil Vyavahare, Rakesh Kumar, Robert Cep, Sachin Salunkhe, Sharad Gawade and Emad S. Abouel Nasr, “Prediction of Machine Learning-Based Hardness for the Polycarbonate using Additive Manufacturing”, Frontiers in Materials, 29 August 2024.
  • Yesaswi Ch Sridhar, Venkata Dinesh Avvari, Santosh Kumar Sahu, P S Rama Sreekanth, Aruna Kumar Barick, Sachin Salunkhe, Robert Cep, and Emad Abouel Nasr; “Exploring fabrication strategies and innovative applications of ionic polymer metal composites: state-of-the-art review”, Engineering Research Express, Volume 6, Number 3, 21 August 2024.  Review Article,
  • Zekai Li, Mohammed A. El-Meligy & Emad Abouel Nasr, “Guided wave propagation in a high-speed rotating concrete shell reinforced by advanced nanocomposites”, Mechanics of Advanced Materials and Structures, 20 Aug 2024.
  • Vijaykumar S. Jatti, Dhruv A. Sawant, Nitin K. Khedkar, Vinaykumar S. Jatti, Sachin Salunkhe, Marek Pagáč, Emad S. Abouel Nasr; “Tensile strength analysis of additively manufactured CM 247LC alloy specimen by employing machine learning classifiers”, PLOS ONE, July 29, 2024.
  • Tejas Patil, Ajit Bhosale, S.G.K. Manikandan, Bibin Jose, Mithul Naidu, Sachin Salunkhe, Robert Cep, Emad Abouel Nasr, “Experimental investigation on solidification cracking & intergranular corrosion of AISI 321 & AISI 316 L dissimilar weld on pulsed current gas tungsten arc welding (PCGTAW)”, Heliyon, Volume 10, Issue 15, 15 August 2024.
  • Sachin Salunkhe, Divyanshu S Morghode, D G Thakur, Lenka Cepova and Emad Abouel Nasr, “Analysis of the thickness of layered armor to provide protection against 7.62 mm ball projectiles using experimental and numerical methods”, Frontiers in Mechanical Engineering, Volume 10, 25 July 2024.
  • Venkata Dinesh Avvari, P. S. Rama Sreekanth, Raghavanantham Shanmugam, Sachin Salunkhe, Robert Cep, Emad Abouel Nasr, and D. Kimmer “Exploring electrospun Nafion nanofibers: Bibliographic insights, emerging possibilities, and diverse applications”, AIP Advances, Review Article, July 18 2024
  • Mohamed Taha, Hamouda M. Mousa, Husain Alfadhel, Emad Abouel Nasr, A.H. Abdelbaky Elbatran, Ahmed Nabhan, Mohamed R. El-Sharkawy, “Utilizing Cellulose Nanofibers to Enhance Spent Engine Oil Performance: A Sustainable Environmental Solution”, Results in Engineering, Volume 23, 25 June 2024.
  • Demet Özaydın Gündüz, Gökhan Küçüktürk, Muharrem Pul, Sachin Salunkhe, Duran Kaya, Mehmet Kabalcı, Robert Čep, and Emad Abouel Nasr, “Electrodeposition of Zn Doped TiO2 Coatings on Ti6Al4V Produced by Selective Laser Melting, the Characterization and Corrosion Resistance”, Materials Research Express, Vol, 11, 28 June 2024.
  • Bharathi Ramesh Kumar, Narayanan Kumaran, Jayavelu Udaya Prakash, Sachin Salunkhe, Raja Venkatesan, Ragavanantham Shanmugam, and Emad S. Abouel Nasr, “A Dynamic Traffic Light Control Algorithm to Mitigate Traffic Congestion in Metropolitan Areas” Vol 24, Issue 12, Sensors, 19 June 2024.
  • Xiaohua Yang, Lijian Jiang, Feng Long & Emad Abouel Nasr, “Flexural wave propagation characteristics of advanced nanocomposites reinforced sandwich structure via 3D-flexibility-deep neural networks approaches”, Mechanics Based Design of Structures and Machines, 30 May 2024.
  • Qingfeng Liu, Mohamed A. Mohamed, Adrian Ilinca, Andres Annuk, Emad Abouel Nasr, “Optimal Scheduling of Regional Integrated Energy Systems with Hot Dry Rock Enhanced Geothermal System Based on Information Gap Decision Theory", Energy Science & Engineering, 13 May 2024.
  • Nasser A. Saeed, Hend A. Saleh, Lei Hou and Emad Abouel Nasr, “A novel chaotic oscillator with a half-line of unstable equilibria: basins of attraction, chaos control, chaos synchronization, and encryption applications”, Modern Physics Letters B, 7 June 2024.
  • Rahul Honkalas, Bhagyesh Deshmukh, Prabhakar Pawar, Sachin Salunkhe, Robert Cep and Emad Abouel Nasr, “Performance improvement of set of worm gears used in soot blower through profile modification”, Frontiers in Mechanical Engineering, Volume 10, 17 May 2024.
  • Charles Sarala Rubi, Jayavelu Udaya Prakash, Sunder Jebarose Juliyana, Robert Čep, Sachin Salunkhe*, Sharad Ramdas Gawade, and Emad S. Abouel Nasr, “Multi-objective Optimization of Machining Variables for Wire- EDM of LM6/Fly Ash Composite Materials using Grey Relational Analysis (GRA)”, Science and Engineering of Composite Materials, vol. 31, no. 1, pp. 20240008, 16 May 2024.
  • Radharaman Tripathi, Tushar A. Jadhav, Mahesh K. Gaikwad, Mithul J. Naidu, Aishwarya B. Gawand, Duran Kaya, Sachin Salunkhe, Robert Cep and Emad Abouel Nasr, “Vibration Analysis of Piping Connected with Shipboard Equipment”, Frontiers in Mechanical Engineering, Volume 10, 15 May 2024.
  • Anas Bilal, Azhar Imran, Talha Imtiaz Baig, Xiaowen Liu, Emad Abouel Nasr & Haixia Long, “Breast cancer diagnosis using Support Vector Machine optimized by Improved Quantum Inspired Grey Wolf Optimization”, Scientific Reports, 10 May 2024.
  • Muhammad Waqas, Muhammad Bilal, Aatif Ali, Emad Abouel Nasr, Sanae Azzouz, Emad E. Mahmoud & Adnan, “Numerical simulation of hybrid nanofluid flow and heat transfer across parallel surfaces with suction/injection and magnetic effect”, Numerical Heat Transfer, Part A: Applications, 09 May 2024.
  • Syed Hammad Miana, Emad Abouel Nasrb, Khaja Moiduddina, Mustafa Salehb, Mustufa Haider Abidia, Hisham Alkhalefah, “Assessment of Consolidative Multi-Criteria Decision Making (C-MCDM) Algorithms for Optimal Mapping of Polymer Materials in Additive Manufacturing: A Case Study of Orthotic Application”, HELIYON, Volume 10, Issue 10, 8 May 2024.
  • Yang, X., Jiang, L., Long, F. et al., “Coupled 3D-flexibility theory and wave propagation approach for vibration analysis of the sandwich structures: introducing deep neural networks to predict vibration problem”, European Physical Journal Plus, 139, 387, 6 May 2024.
  • Kaigude, A.R., Khedkar, N.K., Jatti, V.S. et al. “Surface roughness prediction of AISI D2 tool steel during powder mixed EDM using supervised machine learning”, Scientific Reports, 14, 9683 27 April 2024.
  • Sachin Salunkhe, Nagesh Tambake, Bhagyesh Deshmukh, Sujit Pardeshi, Robert Cep, Emad Abouel Nasr and Haitham A. Mahmoud, “Machine Learning for Monitoring Hobbing Tool Health in CNC Hobbing Machine”, Frontiers in Materials, Volume 11, 12 April 2024.
  • Vijaykumar S. Jatti, Dhruv A. Sawant, Rashmi Deshpande, Sachin Saluankhe, Robert Cep, Emad Abouel Nasr and Haitham A. Mahmoud, “Tribological Analysis of Titanium Alloy (Ti-6Al-4V) Hybrid Metal Matrix Composite through the use of Taguchi's Method and Machine Learning Classifiers”, Frontiers in Materials, Volume 11, 12 April 2024.
  • Asadullah Sohail, Muhammad Adil Khan, Emad Abouel Nasr, and Xiaoye Ding; “Further improvements of the Jensen inequality in the integral sense by virtue of 6-convexity along with applications”, AIMS Mathematics, Volume 9, Issue 5: pp.11278-11303, 22 March 2024,
  • Sachin Salunkhe, Divyanshu S Morghode, D G Thakur, Lenka Cepova and Emad Abouel Nasr, “Numerical Study on the Optimized Thickness of Layer Configuration against 7.62 APM2 Projectile”, Vol. 10, Frontiers in Mechanical Engineering, 4 April 2024.
  • T. Abhishek, Dola Sundeep, C. Chandrasekhara Sastry, K. V. Eswaramoorthy, Gagan Chaitanya Kesireddy, Bobbili Veera Siva Reddy, Rakesh Kumar Verma, Sachin Salunkhe, Robert Cep and Emad Abouel Nasr, “Experimental investigation of tungsten-nickel-iron alloy, W95Ni3.5Fe1.5, in correlation with copper monolithic bullets”, Frontiers in Mechanical Engineering, Volume 10, 16 April 2024.
  •  Muhammad Bilal, Emad Abouel Nasr, Mati Ur Rahman & Muhammad Waqas “Numerical Investigation of MHD Hybrid Nanofluid flow with Heat Transfer Subject to Thermal Radiation across two Coaxial Cylinders, Numerical Heat Transfer, Part A: Applications, 02 Apr 2024.
  • Aditya Verma, Ravi Shankar, Ameer Malik Shaik, B. Veera Siva Reddy, C. Chandrasekhara Sastry, Nizmi Shaik4, Sachin Salunkhe, Robert Cep and Emad Abouel Nasr, “Comprehensive design and analysis of a 300L steel fuel tank for heavy off-road vehicles: numerical and experimental insights”, Frontiers in Mechanical Engineering, Volume 10, 12 February 2024.
  • Mithul Naidu, Ajit Bhosale, Mahesh Gaikwad, Sachin Salunkhe, Robert Čep, and Emad Abouel Nasr, “Tribological investigations of hemp reinforced NAO brake friction polymer composites with varying percentage of resin loading”, Frontiers in Materials, Volume 11, 06 February 2024.
  • Mahesh K. Gaikwad, Savita U. Shinde, Mithul J. Naidu, Tushar A. Jadhav, Sachin Salunkhe, Robert Cep, and Emad Abouel Nasr, “Performance evaluation of looped tube thermoacoustic power generator using cyclic analysis”, Frontiers in Mechanical Engineering, Volume 10, 5 February 2024.
  • Syed Hammad Mian, Emad Abouel Nasr, Khaja Moiduddin, Mustafa Saleh, and Hisham Alkhalefah, “An Insight into the Characteristics of 3D Printed Polymer Materials for Orthoses Applications: Experimental Study”, Polymers, 16(3), 31 January 2024.
  • Vijaykumar S. Jatti, Shahid Tamboli, Sarfaraj Shaikh, Nitin S. Solke, Vikas Gulia, Vinaykumar S. Jatti, Nitin K. Khedkar, Sachin Salunkhe, Marek Pagáč, and Emad S. Abouel Nasr, “Optimization of Tensile Strength in 3D Printed PLA Parts via Meta-Heuristic Approaches: A Comparative Study", Frontiers in Materials, Frontiers in Materials Volume 10, 30 January 2024.
  • Mahesh Naik, V. Pranay, D. G. Thakur, Sunil Chandel, Sachin Salunkhe, Marek Pagac, and Emad S. Abouel Nasr; “Numerical Investigation on Effect of Different Projectile Nose Shapes on Ballistic Impact of Additively Manufactured AlSi10Mg Alloy”, Frontiers in Materials, Volume 11, 19 January 2024.
  • Muharrem Pul, Yılmazel, Mustafa Yasin Erten, Gökhan Küçüktürk, Duran Kaya, Sachin Salunkhe, Yavuz Zümrüt, Robert Cep, Emad S. Abouel Nasr; “Investigation of the Effect of Lubricant Properties of Carbon Nanomaterial in Cu/MWCNT Composites on Wear”, Frontiers in Materials, Volume 10, 18 January 2024.
  • Akshansh Mishra, Vijaykumar S. Jatti, Eyob Messele Sefene, Ashwini V. Jatti, Addisalem Desalegn Sisay, Nitin K. Khedkar, Sachin Salunkhe, Marek Pagáč & Emad S. Abouel Nasr, “Machine Learning-Assisted Pattern Recognition Algorithms for Estimating Ultimate Tensile Strength in Fused Deposition Modeled Polylactic Acid Specimens”, Materials Technology: Advanced Performance Materials, Volume 39, - Issue 1, 17 Dec 2023.
  • Muniba Saleem, Waqar Aslam, Muhammad Ikram Ullah Lal, Hafiz Tayyab Rauf, and Emad Abouel Nasr, “Predicting Thalassemia Using Feature Selection Techniques: A Comparative Analysis”, Diagnostics, 13(22), 14 November 2023.
  • Enzheng Zhang, Ying Chen & Emad Abouel Nasr, “Dynamic responses of functionally graded origami-enabled auxetic metamaterial sector plate induced by mechanical shock: Application of innovative machine learning algorithm”, Journal: Mechanics of Advanced Materials and Structures, 15 Nov 2023.
  • Jayavelu Udaya Prakash, Subramani Ananth, Sunder Jebarose Juliyana1, Robert Cep, Nitin Khedkar, Sachin Salunkhe, Emad Abouel Nasr and Ali Kamrani; “Parametric Optimization of Wear Parameters of Hybrid Composites (LM6/B4C/Fly Ash) using Taguchi Technique”, Frontiers in Mechanical Engineering Tribology, Volume 9, 2 November 2023.
  • Sunder Jebarose Juliyana, Jayavelu Udaya Prakash, Charles Sarala Rubi, Sachin Salunkhe, Sharad Ramdas Gawade, Emad S. Abouel Nasr, and Ali K. Kamrani, “Optimization of Wire EDM Process Parameters for Machining Hybrid Composites using Grey Relational Analysis”, Crystals, 13(11), 28 October 2023.
  • Mathew Alphonse, Arun Prasad Murali, Sachin Salunkhe, Sharad Ramdas Gawade, Boddu V. S. G. Naveen Kumar, Emad Abouel Nasr, and Ali Kamrani; “Wear Analysis on TiSiNOS Coated and Uncoated H13 Steel Tool”, Coatings, 13(10), 17 October, 2023.
  • Md. Mahbubur Rahman, Ved Prakash, Sunil Chandel, D. G. Thakur, Robert Čep, Nitin Khaddar, Sachin Salunkhe and Emad S. Abouel Nasr, “Analysis of the aerodynamic characteristics of an ejection seat system using computational fluid dynamics”, Frontiers in Mechanical Engineering, Vol. 9, 3 October 2023.
  • Hamouda M Mousa, Mostafa M. Sayed, Ibrahim M. A. Mohamed, M. S. Abd El-sadek, Emad Abouel Nasr, M. A. Mohamed and Mohamed Taha, “Engineering of Multifunctional Nanocomposite Membranes for Wastewater Treatment Oil/Water Separation and Dye Degradation”, Membranes, 13, 25 September 2023.
  • Pramod Kathmore, Bhanudas Bachahhav Somnath Nandi, Sachin Salunkhe, Palanisamy Chandrakumar, Emad Abouel Nasr, and Ali Kamrani; “Prediction of Thrust force and Torque for High Speed Drilling of AL6061 under TMPTO based Bio-lubricants using Machine Learning”, Lubricants, 11(9), 23 August 2023.
  • Jayavelu Udaya Prakash, Sunder Jebarose Juliyana, Sachin Salunkhe, Sharad Ramdas Gawade2, Emad S. Abouel Nasr, and Ali K. Kamrani; “Mechanical Characterization and Microstructural Analysis of Stir-Cast Aluminum Matrix Composites (LM5/ZrO2)”, Crystals, 13(8), 7 August 2023.
  • Bhanudas D. Bachchhav, Shrikant V. Chaitanya, Sachin Salunkhe, Palanisamy Chandrakumar, Marek Pagá, and Emad Abouel Nasr; “Wear Performance of Cu–Cd, Cu–Be and Cu–Cr–Zr Spot Welding Electrode Materials”, 11(7), 291 Lubricants, July 2023.
  • Ravi Prakash Singh, Santosh Kumar, Pankaj Kumar Singh, Md. Meraz, Ashutosh Kumar Srivastwa, Sachin Salunkhe, H M A Hussein, Emad S. Abouel Nasr and Ali Kamrani; “A Mathematical Model for Force Prediction in Single Point Incremental Sheet Forming with Validation by Experiments and Simulation”, Processes, 11(6), pp. 1-22, 1 June 2023.
  • Emad Abouel Nasr and H. Al-mubaid, “Functional Annotation and Analysis of Genetic Variants”, IEEE Access, Vol. 11, pp. 32659-32670, April 2023.
  • Emad Abouel Nasr, Haitham A. Mahmoud, Mohammed A. El-Meligy, Emad Mahrous Awwad, Sachin Salunkhe, Vishal Naranje, R. Swarnalatha and Jaber E. Abu Qudeiri, “Electrical efficiency investigation on photovoltaic thermal collector with two different coolants”, Sustainability, 15, 6136, pp.1-14, April 2023.
  • Jie Wu, Yong Yang, Peyman Mehrabi & Emad Abouel Nasr, “Efficient Machine-Learning Algorithm Applied to Predict the Transient Shock Reaction of the Elastic Structure Partially Rested On the Viscoelastic Substrate”, Mechanics of Advanced Materials and Structures, March 2023.
  • Shaoyong Han, Dongsong Zheng, Bahareh Mehdizadeh, Emad Abouel Nasr, Mayeen Uddin Khandaker Mohammad Salman, and Peyman Mehrabi; “Sustainable Design of Self-Consolidating Green Concrete with Partial Replacements for Cement through Neural-Network and Fuzzy Technique”, Sustainability, 15(6), March 2023.
  • Ahmad M. Alshamrani, Mohammed A. El-Meligy, Mohamed Sharaf, Emad Abouel Nasr, “A Joint Optimization Model for Transmission Capacity and Wind Power Investment Considering System Security”, IEEE Access, Vol. 11, pp. 15578-15587, February 2023
  • Muhammad Asif, Munam Ali Shah, Hasan Ali Khattak, Shafaq Mussadiq, Ejaz Ahmed, Emad Abouel Nasr and Hafiz Tayyab Rauf, “Intracranial Hemorrhage Detection Using Parallel Deep Convolutional Models and Boosting Mechanism” Diagnostics 13, 652, February 2023.
  • Muhammad Suleman, Muhammad Ilyas, M. Ikram Ullah Lali, Hafiz Tayyab Rauf *, Seifedine Kadry, Emad Abouel Nasr; “Sperm Abnormality Detection Using Sequential Deep Neural Network”, Mathematics, 18 January 2023.
  • Saud Altaf, Muhammad Haroon, Shafiq Ahmad, Emad Abouel Nasr, Mazen, Zaindin, Shamsul Huda, Zia ur Rehman, “Radio Frequency Identification based 3D Human Pose Estimation using Knowledge-level Technique”, Electronics, 11 January 2023.
  • Emad Fararah, Emad Abouel Nasr, and Haitham A. Mahmoud; “Multi-Objective Optimization Modeling of Integrated Supply Chain for Solid Waste Treatment”, International Journal of Industrial Engineering, 30(1), 147-165, February 2023.
  • Muhammad Zaman-ul-Haq, Ambrina Kanwal, Akber Abid Gardezi, Hina Fatima, Zafeer Saqib, Syed Atif Bokhari, Emad Abouel Nasr, Shafiq Ahmad, and Muhammad Shafiq, “Assessing Spatial-Temporal Changes in Monetary Values of Urban Ecosystem Services through Remotely Sensed Data” Sustainability, 14, 1513, November 2022
  • Rabbia Mahum, Aun Irtaza, Marriam Nawaz, Tahira Nazir, Momina Masood, Sarang Shaikh, Emad Abouel Nasr “A robust framework to generate surveillance video summarization using combination of zernike moments and r-transform and deep neural network”, Multimedia Tools and Applications, 4 October 2022.
  • Seerat Rani, Abd Ur Rehma Beenish Yousaf, Hafiz Tayyab Rauf, Emad Abouel Nasr “and Seifedine Kadry; “Recognition of Handwritten Medical Prescription Using Signature Verification Techniques”, Computational and Mathematical Methods in Medicine, Volume 2022, pp.1-14, 17 September 2022.
  • Muzamil Malik, Waqar Aslam, Emad Abouel Nasr, Zahid Aslam, and Seifedine Kadr; “A Performance Comparison of Classification Algorithms for Rose Plants”, Computational Intelligence and Neuroscience, Vol. 2022, pp.1-16, 16 Aug 2022.
  • Lihong Dong, Guanchen Li, DanWang, Zhenhua Yu, Emad Abouel Nasr, Abdelatty E Abdelgawad, and Emad Fararah; “Granular data modeling and analysis based on optimized subsets of data”, Measurement and Control, pp. 1-15, 3 September 2022.
  • Arun Prasad Murali, Dharmalingam Ganesan, Sachin Salunkhe, Emad Abouel Nasr, João Paulo Davim, and Hussein Mohammed Abdel Moneam Hussein, “Characterization of Microstructure and High Temperature Compressive Strength of Austenitic Stainless Steel (21-4N) through Powder Metallurgy Route”, Crystals, 12(7), 923, June 2022
  • Hamouda M. Mousa, Mustafa Ghazali Ali, Abdelrahman I. Rezk, Emad Abouel Nasr, Kamal Hany Hussein, “Development of conductive polymeric nanofiber patches for cardiac tissue engineering application”, Journal of Applied Polymer Science, June 2022
  • Raj Soni, Sarang Pande, Sachin Salunkhe, Harshad Natu, Emad Abouel Nasr, Ragavanantham Shanmugam, and Hussein Mohammed Abdel Moneam Hussein, “In Vitro and Electrochemical Characterization of Laser Cladded
    Ti-Nb-Ta Alloy for Biomedical Applications”, Crystals, Volume 12, Issue 7, 954,  July 2022.
  • B. Srimanickam, M. Elangovan, Sachin Salunkhe, Emad Abouel Nasr, H. M. A. Hussein, and Ragavanantham Shanmugam, “Experimental Studies on Water-Based Al2O3 Nanofluid to Enhance the Performance of the Hybrid Collector”, Journal of Nanomaterials, July 2022
  • Husam Kaid, Abdulrahman Al-Ahmari, Adel Al-Shayea1, Emad Abouel Nasr, Ali K Kamrani, and Haitham A Mahmoud, “Metaheuristics for Optimizing Unrelated Parallel Machines Scheduling with Unreliable Resources to Minimize Makespan”, Advances in Mechanical Engineering, Advances in Mechanical Engineering, Vol. 14(5) 1–12, May 2022.
  • Haitham Elwahsh, Ahmed Elkhouly, Emad Abouel Nasr, Ali K. Kamrani, and Engy El-shafeiy, “A New Intelligent Approach for Deaf/Dumb People based on Deep Learning”, Computers, Materials & Continua, vol.72, no.3, pp. 6045-6060, April 2022,
  • Mohammed A. El-Meligy, Ahmed M. El-Sherbeeny, Ahmed T.A. Soliman, Abd E. E. Abd Elgawad, Emad A. Naser, “On the solution of robust transmission expansion planning using duality theorem under polyhedral uncertainty set”, Electric Power Systems Research, Volume 206, 107785, May 2022.
  • N.S. Senthur, C Anand, M Ramesh Kumar, P.V. Elumalai, Mohamed Iqbal Shajahan, Ali Cemal Benim, Emad Abouel Nasr, H.M.A. Hussein, M. Parthasarathy, “Influence of Cobalt Chromium Nanoparticles in Homogeneous Charge Compression Ignition Engine Operated with Citronella Oil”, Energy Science and Engineering. Volume 10, Issue 4, PP. 1251-1263, April 2022.
  • Vengatajalapathi Natarajan, Ayyappan Solaiyappan, Siva Kumar Mahalingam, Lenin Nagarajan, Sachin Salunkhe, Emad Abouel Nasr, Ragavanantham Shanmugam, Hussein Mohammed Abdel Moneam Hussein, “Meta-Heuristic Techniques Based Parametric Optimization for Electrochemical Machining of Monel 400 Alloys to Investigate the Material Removal Rate and the Sludge”, Applied Sciences, 12(6), March 2022.
  • Murali, Banu, Bindu M. Vijaya Ramnath, Devaraj Rajamani, Emad A. Nasr, Antonello Astarita, and Hussein Mohamed. "Experimental Investigations on Dry Sliding Wear Behavior of Kevlar and Natural Fiber-Reinforced Hybrid Composites through an RSM–GRA Hybrid Approach"; Volume 15, Issue 3: 749, pp. 1-16, Materials, February 2022.
  • Nitin Khedkar, Akul Bhatt, Dhruval Kapadia, Shantanu Chavan, Yash Agarwal, Emad Abouel Nasr, J. Paulo Davim, Sachin Salunkhe “Design and Structural Simulations of a custom Li-ion Accumulator for Low range, Lightweight, single-seater, open cockpit, and open-wheeled racecar”, Energies, 15(1), 363, January 2022.
  • Adel Al-Shayea, Emad Abouel Nasr, Hisham Al-Mubaid, Abdulrahman Al-Ahmari, Ali K. Kamrani, Husam Kaid, Haitham A. Mahmoud, “A New Association Analysis-Based Method for Enhancing Maintenance and Repair in Manufacturing”, Transactions of FAMENA, Vol. 45 No. 4, pp. 85-104, 2021
  • Abdullah D. Ibrahim, Hussein M. A. Hussein, Ibrahim Ahmed, Emad Abouel Nasr, Ali Kamrani and Sabreen A. Abdelwahab, “Computer-Aided Design of Traditional Jigs and Fixtures”, Applied Sciences, Volume 12, Issue 3, December 2021.
  • Satin Jain, Udit Singhania, B.K. Tripathy, Emad Abouel Nasr, Mohamed K. Aboudaif, Ali K. Kamrani, “Deep Learning based Transfer Learning for Classification of Skin Cancer”, Sensors, 21(23), December 2021.
  • Syed Thouheed Ahmed, Dollar Konjengbam Singh, Syed Muzamil Basha, Emad S. Abouel Nasr, Ali K. Kamrani and Mohamed K. Aboudaif, “Neural Network based Mental Depression Identification and Sentiments Classification Technique from Speech Signals: A COVID-19 Focused Pandemic Study”, Frontiers in Public Health-Digital Public Health, December 2021.
  • Siva Kumar, Mahalingam, Devaraj Rajamani, Emad Abouel Nasr, Esakki Balasubramanian, Hussein Mohamed, and Antonello Astarita; “A hybrid approach of ANFIS - artificial bee colony algorithm for intelligent modeling and optimization of plasma arc cutting on Monel™ 400 alloy”, Materials, Vol. 14, Issue. 21, October 2021
  • Vinothkumar Sivalingam, Jie Sun, Siva Kumar Mahalingam, Lenin Nagarajan, Yuvaraj Natarajan, Sachin Salunkhe, Emad Abouel Nasr, J. Paulo Davim, Hussein Mohammed Abdel Moneam Hussein, “Optimization of process parameters for turning Hastelloy X under different machining environments using evolutionary algorithms: A comparative Study”, Applied Sciences.; Vol. 11, Issue 20, 9725, October 2021
  • Sabry M. El-Shourbagy, Nasser A. Saeed, Magdi Kamel, Kamal R. Raslan, Emad Abouel Nasr, Jan Awrejcewicz, “On the performance of a nonlinear position-velocity controller to stabilize the rotor active magnetic bearings system”, Symmetry, 13(11), November 2021
  • Zhenhua Yu, Xiaobo Li, Emad Abouel Nasr, Haitham A Mahmoud and Liang Xu, “Stability analysis method and application of multi-agent systems from the perspective of hybrid systems”, Measurement and Control, Vol. 54(9-10) 1347–1355, December 2021.
  • Siva Kumar Mahalingam, Lenin Nagarajan, Sachin Salunkhe, Emad Abouel Nasr, Jõao Paulo Davim, and Hussein M.A. Hussein, “Harmony Search Algorithm for Minimizing Assembly Variation in Nonlinear Assembly”, Applied Sciences.; 11(19), October 2021
  • Lenin Nagarajan, Siva Kumar Mahalingam, Sachin Salunkhe, Emad Abouel Nasr, Jõao Paulo Davim and Hussein M. A. Hussein, “A Novel Methodology for Simultaneous Minimization of Manufacturing Objectives in Tolerance Allocation of Complex Assembly”, Applied Sciences; 11(19): October 2021
  • A. Al-Shayea, H. Kaid, A. Al-Ahmari, Emad. Abouel Nasr, A. K. Kamrani and H. A. Mahmoud, "Colored Resource-Oriented Petri Nets for Deadlock Control and Reliability Design of Automated Manufacturing Systems," IEEE Access, Vol. 9, pp. 125616-125627, September 2021.
  • Nasser Abul-Fadeel Saeed, Emad Mahrous, Emad Abouel Nasr, and Jan Awrejcewicz, “Nonlinear Dynamics and Motion Bifurcations of the Rotor Active Magnetic Bearings System with a New Control Scheme and Rub-Impact Force”, Symmetry, 13, 150, August 2021,
  • Mohammed A. Noman, Adel AL-Shayea, Emad Abouel Nasr, Husam Kaid, Abdulrahman Al-Ahmari, Ali K. Kamrani, Haitham A. Mahmoud, “A Model for Maintenance Planning and Process Quality Control Optimization Based on EWMA and CUSUM Control Charts”, Transactions of FAMENA, Vol. 45 No. 1, pp. 95-116, August 2021.
  • Rizwana Irfan, Abdulwahab Ali Almazroi, Hafiz Tayyab Rauf, Robertas Damaševiˇcius, Emad Abouel Nasr and Abdelatty E. Abdelgawad, “Dilated Semantic Segmentation of Ultrasonic Breast Modality through Parallel Feature Fusion”, Diagnostics, 11(7), 1212, July 2021.
  • N.A.Saeed, Emad Mahrous Awwad, Mohammed A.EL-meligy, Emad Abouel Nasr, “Analysis of the rub-impact forces between a controlled nonlinear rotating shaft system and the electromagnet pole legs”, Applied Mathematical Modelling, Volume 93, pp.792-810, May 2021.
  • N.A. Saeed, Emad Mahrous Awwad, Mohammed A. El-Meligy, Emad Abouel Nasr, “Sensitivity analysis and vibration control of asymmetric nonlinear rotating shaft system utilizing 4-pole AMBs as an actuator”, European Journal of Mechanics - A/Solids, Volume 86, 104145, March 2021.
  • V. Priya, I. S. Thaseen, T. R. Gadekallu, M. K. Aboudaif and E. A. Nasr, "Robust Attack Detection Approach for Iiot Using Ensemble Classifier," Computers, Materials & Continua, vol. 66, no.3, pp. 2457–2470, January 2021.
  • Adel AL-Shayea, Emad Fararah, Emad Abouel Nasr, and Haitham A. Mahmoud, “Model for Integrating Production Scheduling and Maintenance Planning of Flow Shop Production System”, IEEE Access, Volume 8, pp. 208826 - 208835, November 2020.
  • Rongfeng Lin, Zhenhua Yu, Xiaonan Shi, Lihong Dong, Emad Abouel Nasr, “On Multi-Step Look-ahead Deadlock Prediction for Automated Manufacturing Systems Based on Petri Nets”, IEEE Access, Volume 8, pp. 170421- 170432, September 2020.
  • Mohamed Iqbalshajahan, Jee Joe Michael, M. Arul Prakasajoth, Sivan Suresh, Emad Abouel Nasr and H. M. A. Hussein. “Effect of Conical Strip Inserts and ZrO2/DI-Water Nanofluid on Heat Transfer Augmentation: An Experimental Study”, Energies, Volume 13, Issue 17, September 2020.
  • Lalitha Krishnasamy, Rajesh Kumar Dhanaraj, Achan Devarajan Ganesh Gopa, Thippa Reddy Gadekallu, Mohamed K. Aboudaif and Emad Abouel Nasr, “A Heuristic Angular Clustering Framework for Secured Statistical Data Aggregation in Sensor Networks”, Sensors, 20(17), August 2020.
  • Adel Al-Shayea, Fawaz M. Abdullah, Mohammed A. Noman, Husam Kaid and Emad Abouel Nasr, “Studying and Optimizing the Effect of Process Parameters on Machining Vibration in Turning Process of AISI 1040 Steel”, Advances in Materials Science and Engineering, Volume 2020, Article ID 5480614, 15 pages, August 2020.
  • Rajamani Devaraj, Emad Abouel Nasr, Balasubramanian Esakki, Ananthakumar Kasi and Hussein Mohamed, “Prediction and Analysis of Multi-Response Characteristics on Plasma Arc Cutting of Monel 400™ Alloy Using Mamdani-Fuzzy Logic System and Sensitivity Analysis”, Materials, 13(16), 3558, pp 1-26, August 2020.
  • Nasser A. Saeed, Emad Mahrous Awwad, Mohammed A. El-Meligy, Emad S. Abouel Nasr, “Radial Versus Cartesian Control Strategies to Stabilize the Nonlinear Whirling Motion of the Six-Pole Rotor-AMBs”, IEEE Access, Volume 8, pp. 138859-138883, August 2020.
  • Sian Zhou, Zhenhua Yu, Emad S. Abouel Nasr, Haitham A. Mahmoud, Emad Mahrous Awwad, Naiqi Wu, “Homomorphic Encryption of Supervisory Control Systems Using Automata”, IEEE Access, Volume 8, pp. 147185-147198, August 2020.
  • Jia Mao, Dou Hong, Runwang Ren, Xiangyu Li, Ju Wang, Emad S. Abouel Nasr, “Driving Conditions of New Energy Logistics Vehicles Using Big Data Technology, IEEE Access, Volume 8, pp. 123891-123903, July 2020.  
  • Mostafa R. Abukhadra, Samar Mohamed Ali, Emad Abouel Nasr, Haitham Abbas Ahmed Mahmoud, and Emad Mahrous Awwad, “Effective Sequestration of Phosphate and Ammonium Ions by the Bentonite/Zeolite Na−P Composite as a Simple Technique to Control the Eutrophication Phenomenon: Realistic Studies”, ACS Omega, Volume: 5, Issue: 24, Pages: 14656-14668, June 2020.
  • Tahir Rizwan, Yunze Cai1, Muhammad Ahsan, Noman Sohail, Emad Abouel Nasr, And Haitham A. Mahmoud, “Neural Network Approach for 2-Dimension Person Pose Estimation with Encoded Mask and Keypoint Detection”, IEEE Access, Volume 8, pp. 107760- 107771, June 2020.
  • Zhaofang Chen, Lele Zhang, Guangdong Tian, and Emad Abouel Nasr, “Economic Maintenance Planning of Complex Systems Based on Discrete Artificial Bee Colony Algorithm", IEEE Access, Volume 8, pp. 108062-108071, June 2020.
  • Husam Kaid, Abdulrahman Al-Ahmari, Emad Abouel Nasr, Adel Al-Shayea, Ali K. Kamrani, Mohammed A. Noman, Haitham A. Mahmoud, “Petri net Model Based on Neural Network for Deadlock Control and Fault Detection and Treatment in Automated Manufacturing Systems”, IEEE Access, Volume 8, pp. 103219-103235, June 2020.
  • Basem M. A. Abdo, Abdualziz El-Tamimi and Emad Abouel Nasr, "Rotary Ultrasonic Machining of Alumina Ceramic: An Experimental Investigation of Tool Path and Tool Overlapping", Applied Sciences Basel, Vol.10, No. 5, pp. 1-21, March 2020.
  • Mohamed A. Mohamed; Emad Mahrous Awwad; Ahmed M. El-Sherbeeny; Emad Abouel Nasr; Ziad M. Ali, “Optimal scheduling of reconfigurable grids considering dynamic line rating constraint”, IET Generation, Transmission & Distribution, Volume: 14, Issue: 10, pp. 862-1871, February 2020.
  • Xiaobo Li, Emad S. Abouel Nasr, Abdulaziz Mohammed El-Tamimi, and Zhiwu Li, "Adaptive Consensus of Two Coupled Heterogeneous Networked Systems with Bidirectional Actions", IEEE Access, Volume 8, pp. 35832-35841, February 2020.
  • Emad Abouel Nasr, Abdulrahman Al-Ahmari, Awais A. Khan, Syed Hammad Mian, Osama Abdulhameed & Ali Kamrani, "Integrated system for automation of process, fixture and inspection planning", Journal of the Brazilian Society of Mechanical Sciences and Engineering, Volume: 42, Issue: 1, pp. 42-52, December 2019.
  • Adel AL-Shayea, Mohammed A. Noman, Emad Abouel Nasr, Husam Kaid, Ali K. Kamrani, and Abdulaziz M. El-Tamimi, "New Integrated Model for Maintenance Planning and Quality Control Policy for Multi-Component System using an EWMA Chart", IEEE Access, Volume 7, pp. 160623- 160636, October 2019.
  • Mohammed A. Noman, Emad S. Abouel Nasr, Adel Al-Shayea, Husam Kaid, “Overview of predictive condition based maintenance research using bibliometric indicators”, Journal of King Saud University – Engineering Sciences, 31, pp. 355–367, 2019.
  • H. Kaid, A. Al-AhmariI, A.M. El-TamimiI, E. Abouel NasrI, Z. LiIII, "Design and Implementation of Deadlock Control for Automated Manufacturing Systems", South African Journal of Industrial Engineering., Vol. 30, No. 1, pp. 1-23, May 2019.
  • Basem M. A. Abdo, Naveed Ahmed, Abdulaziz M. El-Tamimi, Saqib Anwar, Hisham Alkhalefah, Emad Abouel Nasr, "Laser Beam Machining of Zirconia Ceramic: An Investigation of Micromachining Geometry and Surface Roughness", Journal of Mechanical Science and Technology, 33, No. 4, pp. 1-15, April 2019.
  • Cong Wang, Jixing Chen, Zhiwu Li, Emad S. Abouel Nasr, Abdulaziz Mohammed El-Tamimi, "An Indicator System for Evaluating the Development of Land-Sea Coordination Systems: A Case Study of Lianyungang Port", Ecological Indicators, 98, pp.112–120, March 2019.
  • Li X., Chen W., Nasr E.A., El-Tamimi A.M., & Li Z.; ‘Group Consensus for Heterogeneous Multi-Agent Systems with Sampled and Quantized Data Under Directed Communication Topology’. IEEE Access, 7, pp. 48318-48327, March 2019.
  • Basem M. A. Abdo, Saqib Anwar, Abdulaziz M. El-Tamimi, and Emad Abouel Nasr, "Experimental Analysis on the Influence and Optimization of μ-RUM Parameters in Machining Alumina Bioceramic", Materials (Basel), Vol. 12, No. 4. pp. 616, February 2019.
  • Mohammed Alkindi, Sundar Ramalingam, Mohammed Badwelan, Manal A. AlSheddi, Abdulrahman M. Alahmari, Khaja Moiduddin, Emad Abouel Nasr, "In-vivo biocompatibility and functional efficacy of customized electron beam-melted titanium mandibular reconstruction plates", Journal of Biomaterials and Tissue Engineering, Vol. 8, pp. 1–10, 2018.
  • Gangil N., Maheshwari S., Nasr E.A., El-Tamimi A.M., El-Meligy M., & Siddiquee A.N. ‘Another Approach to Characterize Particle Distribution during Surface Composite Fabrication Using Friction Stir Processing’. Metals, 8(8), pp. 568., 2018.
  • Oussama Karoui, Zhiwu Li, Fellow, IEEE, Naiqi Wu, Senior Member, IEEE, Mohamed Khalgui, Emad Abouel Nasr, and Abdulaziz Mohammed El-Tamimi, " One-Step Control-Ahead Approach for the Design of an Optimal Petri-net Based Deadlock Prevention Policy", IEEE Access, 2018.
  • Basem M.A. Abdo, Saqib Anwar, Abdualziz M. El-Tamimi, Abdulrahman M. Alahmari, Emad Abouel Nasr, "Laser micro-milling of bio-lox forte ceramic: An experimental analysis", Precision Engineering Vol. 53, pp. 179–193, 2018.
  • Ibrahim Alharkan, Khaled Bamatraf, Mohammed A. Noman, Husam Kaid, Emad S. Abouel Nasr, and Abdulaziz M. El-Tamimi, "An order effect of neighborhood structures in variable neighborhood search algorithm for minimizing the makespan in an identical parallel machine scheduling", Mathematical Problems in Engineering, vol. 2018, Article ID 3586731, 8 pages, 2018. (https://doi.org/10.1155/2018/3586731)
  • Mohammed A. Noman, Emad S. Abouel Nasr, Adel Al-Shayea, Husam Kaid, "Overview of predictive condition based maintenance research using bibliometric indicators", Journal of King Saud University – Engineering Sciences, Volume 31, Issue 4, , pp. 355-367, October 2019.
  • Xuya Cong, Yufeng Chen, Zhiwu Li, Naiqi Wu, Emad Abouel Nasr, Abdulaziz Mohammed El-Tamimi, "Optimal Petri Net Supervisors of Discrete Event Systems via Weighted and Data Inhibitor Arcs", IEEE Access, Vol. 6, pp. 8245-8257, 2018.
  • Mohammed Al Kindi, Khaja Moiduddin, Abdulrahman Al-Ahmari, Emad S Abouel Nasr, Sundar Ramalingam and Mohammed Badwelan, "Functional and aesthetic outcomes of electron beam-melted titanium reconstruction plates: an in vivo goat study", Biomedical Research, Vol. 28, Issue 5, pp. 2073-2080, 2017.
  • Emad Abouel Nasr, Abdurahman Mushabab Al-Ahmari, Khaja Moiduddin, Mohammed Al Kindi, Ali K. Kamrani, "A digital design methodology for surgical planning and fabrication of customized mandible implants"; Rapid Prototyping Journal, Vol. 23 Issue 1, pp.101–109, 2017.
  • Husam Kaid; Mohammed A. Noman; Emad Abouel Nasr; Mohammed Alkahtani, "Six Sigma DMAIC phases application in Y company: a case study", International Journal of Collaborative Enterprise, Vol. 5 No. 3/4, pp. 181-197, 2016.
  • Khaja Moiduddin, Abdulrahman Al-Ahmari, Mohammed Al Kindi, Emad S. Abouel Nasr, Mohammed Ashfaq, Sundar Ramalingam, "Customized porous implants by additive manufacturing for zygomatic reconstruction"; Biocybernetics and Biomedical Engineering, Volume 36, Issue 4, pp. 719-730, 2016.
  • Khaja Moiduddin, Abdulrahman Al-Ahmari, Emad S. Abouel Nasr, Mohammed Al Kindi, "Evaluation of Titanium Implants fabricated using Electron beam melting and traditional Casting technique", Biomedical Research, Special Issue, pp. S68-S74, 2016.
  • Imane Outmal, Ali Kamrani, Emad S. Abouel Nasr and, Mohammed Alkahtani, "Modeling and Performance Analysis of a Closed-Loop Supply Chain Using First-Order Hybrid Petri Nets", Advances in Mechanical Engineering, Vol. 8(5) 1–15, 2016.
  • Hussein Mohamed A Hussein, Shailendra Kumar, Emad S Abouel Nasr, "Computer-Aided Design and Simulation of Strip Layout for Progressive Die Planning Using Petri Nets", Advances in Mechanical Engineering, Vol. 8, N0. 4, pp. 1–9, March 2016
  • Khaja Moiduddin, Abdulrahman Al-Ahmari, Emad S. Abouel Nasr, Mohammed Al Kindi, Sundar Ramalingam, Ali Kamrani, "Comparing 3-Dimensional Virtual Reconstruction methods in Customized Implants", International Journal of Advanced Biotechnology and Research (IJBR), Vol. 7, Issue 1, pp. 323-331, March 2016.
  • Xiaoliang Chen, Zhiwu Li, Naiqi Wu, Abdulrahman Al-Ahmari, Abdulaziz Mohammed El-Tamimi, Emad Abouel Nasr, "Confusion Diagnosis and Avoidance of Discrete Event Systems Using Supervisory Control", IEEJ Transactions On Electrical and Electronic Engineering, IEEJ Trans, Volume 11, No. 1, pp. 49–62, January 2016.
  • Xiaoliang Chen, Zhiwu Li and Naiqi Wu, Abdulrahman M. Al-Ahmari, Abdulaziz Mohammed El-Tamimi, and Emad S. Abouel Nasr, “Confusion avoidance for discrete event systems by P/E constraints and supervisory control”, IMA Journal of Mathematical Control and Information; Volume 33, Issue 2, pp. 309-332, 2016.
  • Al-Ahmari, Abdulrahmana, Moiduddin, Khajaa, Nasr, Emad S. Abouel, Mian, Syed Hammada, Al Kindi, Mohammede, "A Comparison Study On the Design of Mirror and Anatomy Reconstruction Technique in Maxillofacial Region", Technology and Health Care Journal, vol. 24, no. 3, pp. 377-389, May 2016.
  • Emad Abouel Nasr, Abdulrahman Al-Ahmari, Ali Kamrani, Awais Khan, "An Automatic Fixture Modeling System Using Search Strategy", Journal of Engineering Manufacture, Vol. 229, No. 12, pp. 2165-2179, December 2015.
  • Awais Ahmad Khan, Hussein Mohamed Hussein, Emad Samir Abouel Nasr and Abdulrahman Al-Ahmari, "Computer-Aided Process Planning in Prismatic Shape Die Components Based On Standard for The Exchange of Product Model Data, Advances in Mechanical Engineering, Vol. 7, No. 11, pp. 1–11, 2015.
  • Awais Khan, Emad Abouel Nasr, Abdulrahman Al-Ahmarin, "Independent CAPP System for Prismatic Parts", International Journal of Rapid Manufacturing, Volume 5, No. 2, pp. 129-144, 2015.
  • Emad Abouel Nasr, Abdulaziz M. El-Tamimi, Abdulrahman Al-Ahmari, and Husam Kaid, "Comparison and Evaluation of Deadlock Prevention Methods for Different Size Automated Manufacturing Systems", Mathematical Problems in Engineering, Volume 2015, 2015.
  • Xiaoliang Chena, Gaiyun Liua, Naiqi Wub, Abdulrahman M. Al-Ahmari, Abdulaziz Mohammed El-Tamimi, Emad S Abouel Nasr, "Confusion Control in Generalized Petri Nets Using Synchronized Events", Mathematical Problems in Engineering, Volume 2015, 2015.
  • Al-Ahmari, Abdulrahman; Abouel Nasr, Emad; Moiduddin, Khaja; Anwar, Saqib; Al Kindi, Mohammed; Kamrani, Ali; "A Comparative Study on the Customized Design of Mandibular Reconstruction Plates Using Finite Element Method", Advances in Mechanical Engineering, Vol. 7, Issue 7, pp. 1-11, 2015.
  • Emad Abouel Nasr, Al-Ahmari, Abdurahman Mushabab, Alkhawashki, Hazem; Altamimi, Abdulsalam; Alkhuraisi, Mohammed, "Developing A Methodology for Anylasis and Manufacturing of Proximal Interphalangeal (PIP) joint using Rapid Prototyping Technique", Rapid Prototyping Journal, Vol. 21 Issue 4, pp.449 - 460 – 2015.  
  • Ali Kamrani, Emad Abouel Nasr, Abdulrahman Al-Ahmari, Osama Abdulhameed, Syed Hammad Mian, “Feature-Based Design Approach for Integrated CAD and Computer-Aided Inspection Planning”, Advanced Manufacturing Technology, Vol. 76 Issue 9-12, pp. 2159-2183. Feb 2015.
  • YiFan Hou, Zhiwu Li, Abdulrahman M. Al-Ahmari, Abdulaziz Mohammed El-Tamimi, and Emad S. Abouel Nasr, "Extended Elementary Siphons and Their Application to Liveness-Enforcement of Generalized Petri Nets", Asian Journal of Control, Vol. 16, Issue 6, pp. 1789–1810, 2014.
  • Awais Khan, Emad Abouel Nasr, Abdulrahman Al-Ahmarin, "Independent CAPP System for Prismatic Parts", International Journal of Rapid Manufacturing, 2014.
  • Xiaoliang Chen, Zhiwu Li and Naiqi Wu, Abdulrahman M. Al-Ahmari, Abdulaziz Mohammed El-Tamimi, and Emad S. Abouel Nasr, “Confusion avoidance for discrete event systems by P/E constraints and supervisory control”, IMA Journal of Mathematical Control and Information; 2014.
  • Ali Kamrani, Emad Abouel Nasr, Abdulrahman Al-Ahmari, Osama Abdulhameed, Syed Hammad Mian, “Feature-Based Design Approach for Integrated CAD and Computer-Aided Inspection Planning”, Advanced Manufacturing Technology, 2014 (In print)
  • A. Al-Ahmari, A.A. Khan, E.A. Nasr, A. Kamrani, "An Automatic Fixture Design System For Creating Prismatic Parts", South African Journal of Industrial Engineering, Vol. 25(3), pp 69-83, November 2014.
  • Emad Abouel Nasr, Abdulrahman Al-Ahmari, Ali Kamrani, Awais Khan, "An Automatic Fixture Modeling System Using Search Strategy", Journal of Engineering Manufacture, 2014.
  • Emad Abouel Nasr, Ashraf Afify, Mohammed Osman, Soha Abd Elatty, "Scheduling Flow Shop Manufacturing Systems Considering Agility Issues", International Journal of Collaborative Enterprise, Vol. 4, No. 3, pp. 2205-230, 2014.
  • Emad. S. Abouel Nasr, H.M.A. Hussein, Adham E. Ragab, Ali K. Kamrani, "A Feature-Based Approach To An Integrated CAD/CAPP System In Sheet Metal Blanking Dies", International Journal of Rapid Manufacturing, Vol. 4, No. 2/3/4, pp. 90-118, 2014.
  • Emad Abouel Nasr, Al-Ahmari, Abdurahman Mushabab; Alkhawashki, Hazem; Altamimi, Abdulsalam; Alkhuraisi, Mohammed, "Developing A Methododlgy for Anylasis and Manufacturing of Proximal Interphalangeal (PIP) joint using Rapid Prototyping Technique", Rapid Prototyping Journal, 2014.
  • Hussein M.A. Hussein, Wang J. Fengyin, Emad S. Abouel Nasr, "Development of a Generic Method for recognizing 2D Shapes in a CAD system", Australian Journal of Basic and Applied Sciences, 8(1), pp. 358-369,  January 2014.
  • Qi Wang,  Zhiwu Li, Anrong Wang,  Abdulrahman M. Al-Ahmari, Abdul-Aziz Mohammed El-Tamimi, Emad Abouel Nasr, "A versatile supervisor with one monitor based on macro-tokens", The IMA Journal of Mathematical Control and Information, Vol. 31, pp. 245–256, 2014.
  • Haitham A. Mahmoud, Mohammed H. Hassan, Emad S. Abouel Nasr, "Developing a hybrid genetic algorithm solution to optimise multi-echelon supply chains", International Journal of Collaborative Enterprise, Vol. 3, No. 4, pp. 287-312, 2013.
  • Mustufa Haider Abidi, Abdulaziz M. El-Tamimi, Abdulrahman M. Al-Ahmari, Emad S. Abouel Nasr, "Assessment and comparison of immersive virtual assembly training system", International Journal of  Rapid Manufacturing, Vol. 3, No. 4, pp. 266-283, 2013.
  • Xiao-liang Chen, Zhi-wu Li, Abdulrahman M. Al-Ahmari, Abdulaziz Mohammed El-Tamimi, Emad S. Abouel Nasr, "Confusion Diagnosis And Control Of Discrete Event Systems Using Synchronized Petri Nets", Asian Journal of Control, Vol. 15, Issue 6, pp. 1736–1751, 2013.
  • Emad Abouel Nasr, “A Methodology for Integrating CAD and Automatic Inspection of Standard Manufactured Features”, International Journal of Rapid Manufacturing, Vol. 3, No. 1, pp. 70-88, 2012.
  • Hisham Al-Mubaid, Emad S. Abouel Nasr and Mohammed Hussein, "A methodology for mining material properties with unsupervised learning", International Journal of Rapid Manufacturing, Vol. 1, No. 2, pp.237-252, 2009.
  • Bahram A., Mokhtar A., Mohammad H., Ali K., and Emad Abouel Nasr, "An Overview On Five Approaches For Translating CAD Data Into Manufacturing Information", International Journal of Advanced Manufacturing Systems, Vol. 8, No. 1, pp. 89–114, 2009.
  • Ali K. Kamrani and Emad Abouel Nasr, “Product Design and Development Framework in Collaborative Engineering Environment”, International Journal of Computer Applications in Technology (IJCAT), Vol. 32, No. 2, pp. 85-92, 2008.
  • Mahammad Aloudat, Ali K. Kamrani, and Emad Abouel Nasr, “Cellular Manufacturing Performance Improvement Using Data Mining Techniques”, International Journal of Knowledge Management Studies (IJKMS), Vol. 2, No. 4, pp. 387-405, 2008.
  • Hesham Al-Mubid, Emad Abouel Nasr, and Ali K. Kamrani, “Using Data Mining in the Manufacturing Systems for CAD Model Analysis and Classification”, International Journal of Agile Systems and Management (IJASM), Vol. 3, No. 1/2, pp. 147-162, 2008.
  • Emad Abouel Nasr, and Ali K. Kamrani, “A New Methodology For Extracting Manufacturing Features From CAD System”, International Journal of Computer and Industrial Engineering, Vol. 51, pp. 389-415, 2006.

 
National & International Conferences

  • Abouel Nasr, E. S., Abd El-Aal, R.M.S., and Etman, M.E., New Approach for Flow Sequencing Problems with Buffer Storage Constrains, Proceeding of the PEDAAC, 6th International Conference on Production Engineering Design and Control, Alexandria, Egypt, 1997, pp. 831-840.
  • Emad Abouel Nasr, Abhay Vijayan, and Ali Kamrani, A Feature Based Approach For Integrated Product Design and Process planning, 34th International Conference on Computers and Industrial Engineering, San Francisco, California, November 2004.
  • Abhay Vijayan, Emad Abouel Nasr and Ali Kamrani, Template Based Integrated Design: A Cased Study, 34th International Conference on Computers and Industrial Engineering (CIE), San Francisco, California, November, 2004.
  • Emad Abouel Nasr, and Ali Kamrani, An Object Oriented Approach To Extract Manufacturing Features For CAM Applications, 16th Annual Conference of POMS, Chicago, IL, USA, April 29 - May 2, 2005.
  • Emad Abouel Nasr, and Ali Kamrani, Developing a new Methodology for integrating Design and Manufacturing, IIE Annual Conference, Orlando, Florida, May 20-24, 2006.
  • Hisham Al-Mubaid, Emad Abouel Nasr, Data Mining Based Approach for Feature Analysis in the Manufacturing Systems, 37th International Conference on Computers and Industrial Engineering (CIE), Alexandria, Egypt, October, 2007.
  • Emad Abouel Nasr, Ali Kamrani, A Feature Interaction Approach for CAM Applications, 37th International Conference on Computers and Industrial Engineering (CIE), Alexandria, Egypt, October 2007.
  • Gad El Mola, K. M. and Emad S. Abouel Nasr, Typology and Important Characteristics of Manufacturing Performance Measurement, Proceedings of the 9th Cairo University International Conference on Mechanical Design and Production, Cairo, Egypt, 8-10 January, 2008.
  • Emad Abouel Nasr and Hisham Al-Mubaid, Mining Process Control Data Using Machine Learning, 39th International Conference on Computers and Industrial Engineering (CIE), Troyes, France, July 6 to July 8, 2009.
  • Emad Abouel Nasr, Soha Abd Elatty, and Mohammed Osman. Measuring Agility Index Using System Flexibility and Response, 22th Annual Conference of POMS, April 29 - May 2, Reno, Nevada, USA, 2011
  • Emad Abouel Nasr, Abdulrahman Al-Ahmari, Ali Kamrani, Osama Abdulhameed. Developing An Integrated System for CAD and Inspection Planning, 41th International Conference on Computers and Industrial Engineering (CIE), Los Angeles, California, USA, 23-26 October, 2011.
  • Emad Abouel Nasr, Abdulrahman Al-Ahmari, Ali Kamrani, Awais Ahmad Khan. An integrated System for Automatic Computer Aided Fixture Design. 41th International Conference on Computers and Industrial Engineering (CIE), Los Angeles, California, USA, 23-26 October, 2011.
  • Emad S. Abouel Nasr,  Mustufa H. Abidi, Abdulaziz M. El-Tamimi, Abdulrahman M. Al-Ahmari, “Virtual Assembly in a Semi-Immersive Environment”, International Conference on Industrial Engineering and Systems Management (ICIESM 2013), Barcelona, February 2013.
  • Emad Abouel Nasr, Abdulrahman Al-Ahmari, Ali Kamrani, Osama Abdulhameed, “Automatic Execution of Inspection Plan for Prismatic Parts in online Manufacturing Systems”, IIE Annual conference, Puerto Rico, Volume 4, pp. 2708-2717, 2013.
  • Emad Abouel Nasr, Abdulrahman Al-Ahmari, Ali Kamrani , Awais Khan , “An Object Oriented Approach to CAPP-CAFP System for Prismatic Parts”, IIE Annual conference, Puerto Rico, Volume 4, pp. 2728-2737, 2013.
  • Emad Abouel Nasr, Abdulrahman AI-Ahmari, Osama Abdulhameed, Syed Hammad Mian, "Set up planning for automatic generation of inspection plan", International Conference on Sustainable Intelligent Manufacturing (SIM 2013), Lisbon, Portugal, 26-29 June, 2103.
  • Abdulrahman AI-Ahmari, Emad Abaue! Nasr, Awais A. Khan, Ali Kamrani, "Intelligent fixture planning system for prismatic parts", International Conference on Sustainable Intelligent Manufacturing (SIM 2013), Lisbon, Portugal, 26-29 June, 2103.
  • H.M.A. Hussein, Emad Abaue! Nasr, Awis Khan, "Automated feature extraction from cylindrical parts based on STEP", International Conference on Sustainable Intelligent Manufacturing (SIM 2013), Lisbon, Portugal, 26-29 June, 2103.
  • E. Abouel Nasr, K. Gad El Mola and A. El-Tamimi, “An Effective Green Supply Chain at Energy Production”, CIE43 Proceedings, 16-18 October, The University of Hong Kong, 2013.
  • K. Gad El Mola, E. Abouel Nasr and A. El-Tamimi, “Spare Parts Management By Using Analytic Hierarchy Process”, CIE43 Proceedings, 16-18 October, The University of Hong Kong, 2013
  • E. S. Abouel Nasr, A. A. Khan, A. M. Alahmari, H. M. A. Hussein, "A Feature Recognition System using Geometric Reasoning", International Conference on Manufacture of Lightweight Components – ManuLight 2014, 4th April, Dortmund, Germany, Procedia CIRP 18, pp. 238 – 2 43, 2014.
  • Mustufa H. Abidi, Ibrahim Al Harkan, Abdulaziz M. El Tamimi, A.M. Al Ahmari, Emad S. Abouel Nasr, "Ant Colony Optimization for Job Shop Scheduling to Minimize the Total Weighted Tardiness", IIE Annual Conference, Montréal, Canada, 2014.
  • Emad Abouel Nasr, Abdulrahman Al-Ahmari, Hazem Alkhawashki, Abdulsalam Altamimi, Mohammed Alkhuraisi, Karem Ismai, " A Prospective Finite Element Analysis of Proximal Interphalangeal Joint", IIE Annual Conference, Montréal, Canada, 2014
  • Awais A. Khan, Emad Abouel Nasr, Abdulrahman AlAhmari, Osama Abdulhameed, Mustufa H. Abidi, "An Integrated CAPP/CAFD/CAIP System for Prismatic Parts", IIE Annual Conference, Montréal, Canada, 2014.
  • Abdulaziz M El-Tamimi, Emad Abouel Nasr, Abdulrahman Al-Ahmari, Zhiwu Li, Husam Kaid, “Evaluation of Deadlock Control Designs in Automated Manufacturing Systems”, Proceedings of the 2015 International Conference on Industrial Engineering and Operations Management, Dubai, UAE, March 3–5, 2015.
  • Abdulrahman Al –Ahmari, Emad Abouel Nasr, Ali Kamrani, Mohammed Alkindi, Khaja Moiduddin, "Digital Design and Fabrication of Customized Mandible Implant", Proceedings of the 2015 International Conference on Industrial Engineering and Operations Management, Dubai, UAE, March 3–5, 2015.
  • Ali Kamrani, Maryam Azimi, Emad Abouel Nasr, "Geometrical Analysis and Predictive Modeling of Head and Neck Tumors", Proceedings of the 2015 International Conference on Industrial Engineering and Operations Management, Dubai, UAE, March 3–5, 2015.
  • Awais Ahmad Khan, Emad Abouel Nasr, H.M.A. Hussein, Abdulrahman Al-Ahmari,  "An Automatic Feature Extraction Technique for 2D Punch Shapes", ICAMAME 2016 : 18th International Conference on Aerospace, Mechanical, Automotive and Materials Engineering Montreal Canada, 18 (5) Part XI, May 16-17, 2016.
  • Gangil N., Maheshwari S., Nasr E.A., El-Tamimi A.M., El-Meligy M., & Siddiquee A.N., ‘Another Approach to Characterize Particle Distribution during Surface Composite Fabrication Using Friction Stir Processing’. Metals, 8(8), pp. 568. 2018.
  • Mohammed A. Noman, Adel AL-Shayea, Emad Abouel Nasr, Abdulaziz M. El-Tamimi, and Husam Kaid, "Overview and Applications of the Integrated Approaches of Maintenance and Process Quality Control", Proceedings of the International Conference on Industrial Engineering and Operations Management 1St GCC International Conference on Industrial Engineering and Operations Management (IEOM), Riyadh, Saudi Arabia, Issue November, 2019, Pages 296-307, pp. 296 -  307, November 26-28, 2019.
  • Husam Kaid, Abdulaziz M. El-Tamimi, Abdulrahman Al-Ahmari, and Mohammed A. Noman, “Design and Implementation of Deadlock Control in Manufacturing Systems”, 1St GCC International Conference on Industrial Engineering and Operations Management (IEOM), Riyadh, Saudi Arabia, pp. 786 - 797, November 26-28, 2019.
  • Husam Kaid, Abdulrahman Al-Ahmari, Emad Abouel Nasr, Adel Al-Shayea, Ali K. Kamrani, and Haitham A. Mahmoud, “Supervisor Controller-Based Elementary Siphons and Colored Petri Net for Deadlock Control and Machine Failures in Automated Manufacturing Systems”, Proceedings of the International Conference on Industrial Engineering and Operations Management in Sao Paulo, Brazil during April 5-8, 2021
  • Husam Kaid, Abdulrahman Al-Ahmari, Emad Abouel Nasr, Adel Al-Shayea, Ali K. Kamrani, Mohammed A. El-Meligy, and Haitham A. Mahmoud, “An effective Hybrid Petri net and Tabu Search for Parallel Machines Scheduling with Availability Constraint”, Proceedings of the 7th North American International Conference on Industrial Engineering and Operations Management, Orlando, Florida, USA, June 12-14, 2022

 

    JOURNALS               

    • Branch IE Editor: Journal of Engineering Research, (2022- Present)
    • Ex-Chief in Editors: International Journal of Collaborative Enterprise
    • Guest Editors: International Journal of Computer Applications in Technology (IJCAT), Special Issue on: “Computer Based Design and Manufacturing”, (2008).
    • Guest Editors: International Journal of Agile Systems and Management (IJASM), Special Issue on: "Complexity in Manufacturing" (2008).
    • Guest Editors: International Journal of Rapid Manufacturing, Special Issue on: "Data Mining and Knowledge Managements" (2009).
    • Guest Editors: International Journal of Rapid Manufacturing, Special Issue on: "Lean Manufacturing" (2009).
    • Guest Editors: International Journal of Collaborative Enterprise, Special Issue on: "Reverse Engineering" (2010).
    • Guest Editors: International Journal of Rapid Manufacturing, Special Issue on: "Rapid Manufacturing in Medical Application" (2010).

     
    Review Papers            

    • International Journal of Production Research (IJPR)
    • International Conference on Computers and Industrial Engineering (CIE), San Francisco, California, November 2004.
    • International Conference on Computers and Industrial Engineering (CIE), Troyes, France, July 6 to July 8, 2009.
    • International Journal of advanced manufacturing Technology

     

    PRESENTATIONS     

    • Emad Abouel Nasr: Paper presented in 16th Annual Conference of POMS, April 29 - May 2, 2005, Chicago, IL.
    • Emad Abouel Nasr: Paper presented in 34th International Conference on Computers and Industrial Engineering (CIE), San Francisco, California, November, 2004.
    • Emad Abouel Nasr: Paper presented in 37th International Conference on Computers and Industrial Engineering (CIE), Alexandria, Egypt, October, 2007.
    • Emad Abouel Nasr: Paper presented in 9th Cairo University International Conference on Mechanical Design and Production, Cairo, Egypt, 8-10 January, 2008.
    • Emad Abouel Nasr: Paper presented in 39th International Conference on Computers and Industrial Engineering (CIE), Troyes, France, July 6 to July 8, 2009.
    • Emad Abouel Nasr. Measuring Agility Index Using System Flexibility and Response, Paper presented in 22th Annual Conference of POMS, April 29 - May 2, Reno, Nevada, USA, 2011
    • Emad Abouel Nasr. Developing An Integrated System for CAD and Inspection Planning, 41th International Conference on Computers and Industrial Engineering (CIE), Los Angeles, California, USA, 23-26 October, 2011.
    • Emad Abouel Nasr. An integrated System for Automatic Computer Aided Fixture Design. 41th International Conference on Computers and Industrial Engineering (CIE), Los Angeles, California, USA, 23-26 October, 2011.
    • Emad S. Abouel Nasr, “Virtual Assembly in a Semi-Immersive Environment”, International Conference on Industrial Engineering and Systems Management (ICIESM 2013), Barcelona, February 2013.
    • Emad Abouel Nasr, “Automatic Execution of Inspection Plan for Prismatic Parts in online Manufacturing Systems”, IIE Annual conference, Puerto Rico, 2013.
    • Emad Abouel Nasr, “An Object Oriented Approach to CAPP-CAFP System for Prismatic Parts”, IIE Annual conference, Puerto Rico, 2013.

     
     SCIENTIFIC, HONOR, AND PROFESSIONAL SOCIETIES

    • Alpha Pi Mu (Industrial Engineering Honor Society)
    • Institute of Industrial Engineers (IIE)
    • Society of Manufacturing Engineers (SME)