Studies on High Density Polyethylene Reinforced with Phosphate Ore Particles: Thermal, Rheological, Mechanical and Morphological Properties

مقال فى مجلة
رقم الانشاء
رقم المجلد
تاريخ المؤتمر
ملخص المنشورات

Calcareous phosphate ore can be utilized as a cost-effective alternate to other inorganic fillers for
polymer-based composites. In this study, composites of high-density polyethylene and phosphate
rock ore particles were prepared by melt blending and injection-molding techniques. The
thermomechanical, rheological, and mechanical properties of these composites were studied to
investigate the effect of filler loading on their functionality. The reduction in the crystallinity of
phosphate ore/high-density polyethylene composites was observed compared to that of the neat
high-density polyethylene. The relative crystallinity of the neat high-density polyethylene decreases
from 53 to 30% by the addition of 2.5–15 wt% of ore, respectively. Comparison of the linear dynamic
viscoelasticity for the neat high-density polyethylene and the ore-filled composites shows t a
monotonic increase in both storage modulus and loss modulus with the increasing frequency. The
viscoelastic behavior at high frequencies remains unaffected. However, at lower frequencies, both G′
and G″ exhibit diminished frequency dependence. It was also observed that higher filler
content decreased the tensile and impact strength, whereas the Young’s modulus of the composites
increased. The morphological analysis shows relatively weak interaction between the fillers and the
matrix because of agglomeration which in turn adversely affects the mechanical properties of the

المرفق الحجم
9-ppte.pdf 912.96 كيلوبايت