Skip to main content
User Image

Hussam Alghamdi

Assistant Professor

Faculty

كلية الهندسة
Department of Civil Engineering, King Saud University, Office: 2A82

Novel Materials and Processing Routes Using Alkali-activated Systems

Alghamdi, Hussam . 2019

This dissertation aims at developing novel materials and processing routes using alkali activated aluminosilicate binders for porous (lightweight) geopolymer matrices and 3D-printing concrete applications. The major research objectives are executed in different stages. Stage 1 includes developing synthesis routes, microstructural characterization, and performance characterization of a family of economical, multifunctional porous ceramics developed through geopolymerization of an abundant volcanic tuff (aluminosilicate mineral) as the primary source material. Metakaolin, silica fume, alumina powder, and pure silicon powder are also used as additional ingredients when necessary and activated by potassium-based alkaline agents. In Stage 2, a processing route was developed to synthesize lightweight geopolymer matrices from fly ash through carbonate-based activation. Sodium carbonate (Na2CO3) was used in this study to produce controlled pores through the release of CO2 during the low-temperature decomposition of Na2CO3. Stage 3 focuses on 3D printing of binders using geopolymeric binders along with several OPC-based 3D printable binders. In Stage 4, synthesis and characterization of 3D-printable foamed fly ash-based geopolymer matrices for thermal insulation is the focus. A surfactant-based foaming process, multi-step mixing that ensures foam jamming transition and thus a dry foam, and microstructural packing to ensure adequate skeletal density are implemented to develop foamed suspensions amenable to 3D-printing. The last stage of this research develops 3D-printable alkali-activated ground granulated blast furnace slag mixture. Slag is used as the source of aluminosilicate and shows excellent mechanical properties when activated by highly alkaline activator (NaOH + sodium silicate solution). However, alkali activated slag sets and hardens rapidly which is undesirable for 3D printing. Thus, a novel mixing procedure is developed to significantly extend the setting time of slag activated with an alkaline activator to suit 3D printing applications without the use of any retarding admixtures. This dissertation, thus advances the field of sustainable and 3D-printable matrices and opens up a new avenue for faster and economical construction using specialized materials.

Publication Work Type
PHD
Thesis Type
PhD Dissertation
School
Arizona State University
more of publication
publications

This dissertation aims at developing novel materials and processing routes using alkali activated aluminosilicate binders for porous (lightweight) geopolymer matrices and 3D-printing concrete…

by Hussam Alghamdi
2019
publications

Synthesis and characterization of 3D-printable foamed fly ash-based geopolymer matrices for thermal insulation is the focus of this paper.

by Hussam Alghamdi, Narayanan Neithalath
2019
publications

Material design of alkali activated fly ash-based binders for extrusion-based 3D printing, the rheological responses that are influential in ensuring printability, and the properties of such…

by Hussam Alghamdi, Sooraj A. O. Nair, Narayanan Neithalath
2019