Total publications: Over 230

SELECTED PUBLICATIONS 

International Refereed Journals

• M.I. Khan, W. Abbass, M. Alrubaidi, F. Alqahtani. “Optimization of the Fine to Coarse Aggregate Ratio for the Workability and Mechanical Properties of High Strength Steel Fiber Reinforced Concretes.” Materials 2020, Volume 13, Issue 22, 5202. Nov 2020. https://doi.org/10.3390/ma13225202
• M. Rehman, K. Rashid, I. Zafar, F.K. Alqahtani and M.I. Khan. “Formulation and characterization of geopolymer and conventional lightweight green concrete by incorporating synthetic lightweight aggregate.” Journal of Building Engineering.  Vol. 31, September 2020, 101363. https://doi.org/10.1016/j.jobe.2020.101363
• S. Iftikhar; E. Ul Haq, I. Zafar, F.K. Alqahtani and M.I. Khan. “Synthesis and Characterization of Sustainable Geopolymer Green Clay Bricks: An Alternative to Burnt Clay Brick.” Construction and Building Materials. Vol. 259, October 2020, 119659. https://doi.org/10.1016/j.conbuildmat.2020.119659
• G. Fares, M.H. Albaroud, M.I. Khan. “Fine limestone dust from ornamental stone factories: a potential filler in the production of High-Performance Hybrid Fiber-Reinforced Concrete.” Construction and Building Materials. Vol. 262, November 2020, 120009. https://doi.org/10.1016/j.conbuildmat.2020.120009
• G. Fares and M.I. Khan. “Rheology and its relation to strain-hardening properties of SHCC.” ACI Journal of Materials, Vol. 116, No. 5, September 2019, pp. 193-203. https://doi.org/10.14359/51716813
• M.I. Khan and G. Fares. “Strain capacity to crack area fraction relationship in strain-hardening cement-based composites.” Construction and Building Materials. Vol. 213, July 2019, pp. 337–347. ​https://doi.org/10.1016/j.conbuildmat.2019.04.069
• M.I. Khan, Y.M. Abbas, and G. Fares. “Simplex-lattice hydration prediction and microstructure verification of cementitious systems.” Materials. MDPI Switzerland, January 2019, Vol. 12(3) 490. https://doi.org/10.3390/ma12030490 
• W. Abbass, M.I. Khan and S. Mourad. “Experimentation and predictive models for properties of concrete added with active and inactive SiO2 fillers.” Materials. MDPI Switzerland, January 2019, Vol. 12(2) 299. https://doi.org/10.3390/ma12020299
• W. Abbass, M.I. Khan and S. Mourad. “Evaluation of mechanical properties of steel fiber reinforced concrete with different strengths of concrete.” Construction and Building Materials. Vol. 168, April 2018, Pages 556–569. https://doi.org/10.1016/j.conbuildmat.2018.02.164 
• F.K. Alqahtani, G. Ghataora, S. Dirar, M.I. Khan and I. Zafar, 2018, “Experimental Study to Investigate the Engineering and Durability Performance of Concrete Using Synthetic Aggregates.” Construction and Building Materials. Vol. 173, June 2018, pp. 350–358.https://doi.org/10.1016/j.conbuildmat.2018.04.018

• A.I. Al-Negheimish, G. Fares, A.M. Alhozaimy and M.I. Khan, 2018, “Visual-based evaluation method for optimizing the Dosage of PCE-based Superplasticizer for SCC paste and concrete.” Journal of Civil Engineering Materials. ASCE. Vol. 30, No. 8, August 2018. https://ascelibrary.org/doi/abs/10.1061/%28ASCE%29MT.1943-5533.0002374
• R. Masmoudi, A.M. Ali, D. Robillard and M.I. Khan. “Experimental investigation of bond and tube thickness effect on the flexural behavior of concrete-filled FPR tube under lateral cyclic loading.” Journal of King Saud University - Engineering Sciences. Vol. 31, No. 1, January 2019, pp. 32-41. https://doi.org/10.1016/j.jksues.2017.09.005
• M.I. Khan, Y.M. Abbas and G. Fares, “Review of high and ultrahigh performance cementitious composites incorporating various combinations of fibers and ultrafines.” Journal of King Saud University - Engineering Sciences. Vol. 29, No. 4, October 2017, pp. 339-347. http://www.sciencedirect.com/science/article/pii/S101836391730020X
• M.I. Khan and Y. M. Abbas. “Curing optimization for strength and durability of silica fume and fuel ash concretes under hot weather conditions.” Construction and Building Materials. Vol. 157, No. 30, December 2017, pp. 1092-1105.
• http://www.sciencedirect.com/science/article/pii/S0950061817320056
• M.I. Khan, G. Fares, and S. Mourad. “Optimized fresh and hardened properties of strain hardening cementitious composites: Effect of mineral admixtures, cementitious composition, Size and type of Aggregates.” Journal of Civil Engineering Materials, ASCE, USA. Vol. 29, No. 10 (October 2017).
• http://ascelibrary.org/doi/abs/10.1061/%28ASCE%29MT.1943-5533.0002039
• M.I. Khan, G. Fares, and S. Mourad. “Optimized fresh and hardened properties of strain hardening cementitious composites: Effect of mineral admixtures, cementitious composition, Size and type of Aggregates.” Journal of Civil Engineering Materials, ASCE, USA. Journal of Civil Engineering Materials. ASCE, Vol. 29, No. 10, October 2017, pp. http://ascelibrary.org/doi/abs/10.1061/%28ASCE%29MT.1943-5533.0002039
• M.I. Khan, “A novel method for measuring porosity for normal and high strength concrete." Journal of Testing and Evaluation. ASTM, Vol. 45, No. 5, September 2017, pp. 1800-1820.  https://doi.org/10.1520/JTE20160198.
• F.K. Alqahtani, G. Ghataora, M.I. Khan and S. Dirar. “Novel lightweight concrete containing manufactured plastic aggregate.” Construction and Building Materials. Vol. 148, September 2017, pp. 386–397.
• http://www.sciencedirect.com/science/article/pii/S0950061817308863
• F.K. Alqahtani, M.I. Khan, G. Ghataora and S. Dirar. “Production of recycled plastic aggregates and its utilization in concrete.” Journal of Civil Engineering Materials. ASCE, Vol. 29, No. 4 (April 2017).
• http://dx.doi.org/10.1061/(ASCE)MT.1943-5533.0001765#sthash.sOYQ0DgC.dpuf
• M.I. Khan, S. Mourad and A. Charif, “Utilization of supplementary cementitious materials in HPC: From rheology to pore structure.” KSCE Journal of Civil Engineering. Vol. 21, No. 3, March, 2017. pp. 889–899.
• https://link.springer.com/article/10.1007/s12205-016-1781-x
• M.I. Khan, G. Fares, S. Mourad and W. Abbass. “Optimized fresh and hardened properties of SHCC: Effect of sand size and workability.” Journal of Civil Engineering Materials. ASCE. Vol. 28, Issue 12 (December 2016)
• http://dx.doi.org/10.1061/(ASCE)MT.1943-5533.0001665#sthash.464c6Dx4.dpuf
• M.I. Khan and W. Abbass, “Flexural behavior of high-strength concrete beams reinforced with a strain hardening cement-based composite layer.” Construction and Building Materials, Vol. 125, 30 October 2016, Pages 927–935.
• http://dx.doi.org/10.1016/j.conbuildmat.2016.08.132
• Y.M. Abbas and M.I. Khan. “Fiber-matrix interfacial behavior of hooked-end steel fiber reinforced concrete”. Journal of Civil Engineering Materials. ASCE, Vol. 28, 2016.  http://dx.doi.org/10.1061/(ASCE)MT.1943-5533.0001626#sthash.YpVTaup9.dpuf
• Charif, S. Mourad and M.I. Khan. “Flexural behavior of beams reinforced with steel bars exceeding the nominal yield strength.” Latin American Journal of Solids and Structures, Vol. 13, 2016, pp. 946-964.
• http://dx.doi.org/10.1590/1679-78251683
• Y.M. Abbas and M.I. Khan. “Influence of fiber properties on shear failure of steel fiber reinforced beams without web reinforcement: ANN modeling.” Latin American Journal of Solids and Structures, Vol. 13, 2016, pp. 1483-1498.
• http://dx.doi.org/10.1590/1679-78252851
• Y.M. Abbas and M.I. Khan. “Theoretical and physical modeling of fiber-matrix interactions:  A review paper.”  Arabian Journal for Science and Engineering (AJSE), Vol. 41, No. 4, 2016, pp. 1183-1198.
• http://dx.doi:10.1007/s13369-016-2099-1
• G. Fares, R.Z. Al-Zaid, A. Fauzi, A.M. Alhozaimy,  A.I. Al-Negheimish and M.I. Khan. “Performance of optimized EAFD-based cementitious matrix compared to conventional supplementary cementitious materials.” Construction and Building Materials, Vol. 112, 2016, pp. 210-221.
• http://dx.doi.10.1016/j.conbuildmat.2016.02.068
•  R. Siddique, V.N. Kunal, E. Kadri, M.I. Khan and A. Rajor. “Influence of Bacteria on Compressive Strength and Permeation Properties of Concrete Made With Cement Baghouse Filter Dust.” Construction and Building Materials, Vol. 106, 2016, pp. 461-469. http://dx.doi.org/10.1016/j.conbuildmat.2015.12.112
• M.I. Khan, “Hybrid Fiber and Ultrahigh Performance Cementitious Composites.” MOJ Civil Eng, Vol. 1, Issue 1, 2016. Editorial.
• http://medcraveonline.com/MOJCE/MOJCE-01-00004.php
• M.I. Khan, S.M. Mourad, W.M. Zahid. “Developing and qualifying Civil Engineering Programs for ABET accreditation.” Journal of King Saud University – Engineering Sciences, Vol. 28, 2016, pp. 1-11. https://doi.org/10.1016/j.jksues.2014.09.001
• G. Fares, M.I. Khan, S. Mourad and W. Abbass, “Evaluation of PVA and PBI-based engineered-cementitious composites under different environments”. Construction and Building Materials, 85, 2015, 109–118. https://doi.org/10.1016/j.conbuildmat.2015.03.080
• G. Fares and M.I. Khan “The effect of curing time on the ASR expansion of different HPC, Composites” Construction and Building Materials, Vol. 72, (2014), pp. 124–132. https://doi.org/10.1016/j.conbuildmat.2014.08.062
• G. Fares and M.I. Khan “HPC composites formulated to counteract early ASR expansion” Journal of Materials in Civil Engineering, ASCE, 25(12), 2013, pp. 1951–1958. https://doi.org/10.1061/(ASCE)MT.1943-5533.0000790
• M.I. Khan, “Prediction model and relationship of compressive and tensile strengths for high performance concrete”, Applied Mechanics and Materials, Vol. 377, (2013), pp. 92-98. https://doi.org/10.4028/www.scientific.net/AMM.377.92
• M.I. Khan, “Ring test for the measurement of restrained shrinkage of concrete”, Applied Mechanics and Materials, Vol. 377, (2013), pp. 86-91. https://doi.org/10.4028/www.scientific.net/AMM.377.86
• M.I. Khan and A.A. Abadel, “Numerical modeling of steel fiber-reinforced beam”, Applied Mechanics and Materials, Vol. 377 (2013) pp 22-27.
• https://doi.org/10.4028/www.scientific.net/AMM.377.22
• G. Fares and M.I. Khan, “Nanosilica and its future prospects in concrete”, Advanced Materials Research, Vol. 658, 2013, pp. 50-55.
• https://doi.org/10.4028/www.scientific.net/AMR.658.50
• M.N. Haral, A.I. Al-Negheimesh, G. Fares, M.I. Khan, and A.M. Alhozaimy, “Effects of paste content on flow characteristics of scc containing local natural pozzolan”, World Academy of Science, Engineering and Technology, 79, 2013, pp. 803-807.
• https://waset.org/publications/16402/effects-of-paste-content-on-flow-characteristics-of-scc-containing-local-natural-pozzolan
• M.I. Khan, “Predicting properties of high performance concrete containing composite cementitious materials using artificial neural networks”, Automation in Construction. Vol. 22, March 2012, pp. 516-524.
• https://doi.org/10.1016/j.autcon.2011.11.011
• M.I. Khan, “Mix proportions for hpc incorporating multi-cementitious composites using artificial neural networks”, Construction & Building Materials. Vol. 28, No. 1, 2012, pp. 14–20. https://doi.org/10.1016/j.conbuildmat.2011.08.021
• M.I. Khan, “Evaluation of non-destructive testing of high strength concrete incorporating supplementary cementitious composites”, Resources, Conservation and Recycling, Vol. 61, 2012, pp. 125-129.
• https://doi.org/10.1016/j.resconrec.2012.01.013
• M.I. Khan and Raft Siddique, “Utilization of silica fume in concrete: review of durability properties”, Resources, Conservation and Recycling, Vol. 57, 2011, pp. 30–35. https://doi.org/10.1016/j.resconrec.2011.09.016
• M. I. Khan, "Comparison of chloride ion penetration and diffusion of high-performance concrete", KSCE Journal of Civil Engineering, Vol. 16, No. 6, 2012. https://doi.org/10.4028/www.scientific.net/AMR.168-170.2171
• M.I. Khan, “Direct Tensile strength measurement of concrete”, Applied Mechanics and Materials, Vols. 117-119, 2012, pp. 9-14.
• https://doi.org/10.4028/www.scientific.net/AMM.117-119.9
• M.I. Khan, "Measurement and prediction of absorption of concrete using rilem vacuum saturation method", Advanced Materials Research, Vols. 243-249, pp. 156-159. https://doi.org/10.4028/www.scientific.net/AMR.243-249.156
• M.I. Khan, A. M. Alhozaimy, "properties of natural pozzolan and its potential utilization in environmental friendly concrete", Canadian Journal of Civil Engineering, Vol. 38, No. 1, January 2011, pp. 71-78. https://doi.org/10.1139/L10-112
• M.I. Khan, T.H. Almusallam, A.A. Almosa, S.H. Alsayed and Y.A. Al-Salloum, "Evaluation and performance of repair materials for rehabilitation of concrete structures", Advanced Materials Research, Advances in Structures, Vols. 163-167, January 2011, pp. 3820-3825.
• https://doi.org/10.4028/www.scientific.net/AMR.163-167.3820
• M.I. Khan, “Non-destructive testing for concrete: dynamic modulus and ultrasonic velocity measurements”, Advanced Materials Research, Vols. 243-249, January 2011, pp. 165-169. https://doi.org/10.4028/www.scientific.net/AMR.243-249.165
• M.I. Khan, “Nanostructure and microstructure of cement concrete incorporating multi-cementitious composites", Journal of the Transportation Research Board, No. 2141, Washington D.C., 2010, pp. 21-27.
• https://www.idc-online.com/technical_references/pdfs/civil_engineering/Chloride%20Ingress.pdf
• M.I. Khan, "Comparison of diffusion and chloride ion penetration of high-performance concrete, Advanced Materials Research, Advances in Building Materials, Vols. 168-170, January 2011, pp. 2171-2177.
• https://link.springer.com/article/10.1007/s12205-012-1237-x
• M.I. Khan, “Rheological characteristics of HPC containing composite cementitious materials", Concrete Technology - Journal of the Concrete Plant International, No. 02/10, Germany, April 2010, pp. 78-84.
• https://www.cpi-worldwide.com/en/journals/artikel/1545/entry_1545
• M.I. Khan, “Chloride ingress resistant concrete: high performance concrete containing supplementary composites”, International Journal of Civil & Environmental Engineering, Vol. 10, No.4, August 2010, pp. 41-47.
• http://www.ijens.org/108304-9191%20IJCEE-IJENS.pdf
• M.I. Khan, “Analytical model for the prediction of strength for HPC consisting of cementitious composites", Journal of Architecture Civil Engineering Environment (ACEE), Vol. 2(1), 2009, pp. 89-96. http://acee-journal.pl/1,7,9,Issues.html
• M.I. Khan, “Optimization of high strength concrete using multicementitious composites", Journal of Engineering, Vol. 2, No. 3(1), January 2009, pp. 91-102.
• M.I. Khan, “Application of artificial neural networks for the prediction of hydration of high strength concrete", Journal of Engineering, Vol. 2, No. 3, 2008, pp. 163-173.
• M.I. Khan, “Permeation of high performance concrete” Journal of Materials in Civil Engineering, ASCE, USA, Vol. 15, No. 1, January/February 2003, pp. 84-92.
• https://doi.org/10.1061/(ASCE)0899-1561(2003)15:1(84)
• M.I. Khan, “Isoresponses for strength, permeability and porosity of high performance blended cement mortar”, Building and Environment, Vol. 38, No. 8, August 2003, pp. 1051-1056. https://doi.org/10.1016/S0360-1323(01)00061-0
• M.I. Khan, “Factors affecting the thermal properties of concrete and applicability of its prediction models,” Building and Environment, UK, Vol. 37, No. 6, July 2002, pp 607-614. https://doi.org/10.1016/S0360-1323(01)00061-0
• M.I. Khan and C.J. Lynsdale, “Strength, permeability and carbonation of high-performance concrete” Cement and Concrete Research, USA, Vol. 32, No. 1, February 2002, pp 123-131. https://doi.org/10.1016/S0008-8846(01)00641-X
• M.I. Khan, C.J. Lynsdale and P. Waldron, “Porosity and strength of PFA/SF/OPC ternary blended paste”, Cement and Concrete Research, Vol. 30, No. 8, August 2000, pp. 1225-1229. https://doi.org/10.1016/S0008-8846(00)00307-0

 
International Refereed Conference Papers  

• M.I Khan and W. Abbass. “Effect of Hybridization of steel fibers on the mechanical properties of high strength concrete.” The 5th International Conference on Concrete Repair, Rehabilitation and Retrofitting, ICCRRR 2018. 19-21 November 2018, Cape Town, South Africa.
• https://doi.org/10.1051/matecconf/201819911006
• W. Abbass and M.I Khan. “Mechanical properties of hybrid steel/PVA fiber reinforced high strength concrete.” The 5th International Conference on Concrete Repair, Rehabilitation and Retrofitting, ICCRRR 2018. 19-21 November 2018, Cape Town, South Africa. https://doi.org/10.1051/matecconf/201819911005
• S.U. Sial and M.I. Khan. “Performance of strain hardening cementitious composite as strengthening and protective overlay in flexural members.” The 5th International Conference on Concrete Repair, Rehabilitation and Retrofitting, ICCRRR 2018. 19-21 November 2018, Cape Town, South Africa.
• https://doi.org/10.1051/matecconf/201819909005
• M.I. Khan and M. A. Yassir. “Novel fiber pullout test of Fiber Reinforced Concrete (FRC): consistency and repeatability analysis.” First International Conference on Cement and Concrete Technology, Muscat, Oman, Nov 20-22, 2017, pp. 409-416.
• https://www.concreteconference.org.uk/conference-themes
• M.A. Yassir and M.I. Khan. “Parametric investigation on the shear strength of steel fiber reinforced concrete deep beams using artificial neural networks.” First International Conference on Cement and Concrete Technology, Muscat, Oman, Nov 20-22, 2017, pp. 417-421. https://www.concreteconference.org.uk/conference-themes
• U. Sial and M.I. Khan. “Study on flexural performance of engineered cementitious composite layers in the tensile region of reinforced concrete beams.” First International Conference on Cement and Concrete Technology, Muscat, Oman, Nov 20-22, 2017, pp. 422-430. https://www.concreteconference.org.uk/conference-themes
• A.M. Ali, R. Masmoudi and M.I. Khan. “Effect of sand-coating bond performance on the flexural capacity of circular concrete-filled FRP tubes.” CSCE Annual Conference - Leadership in Sustainable Infrastructure, Vancouver, May 31 – June 3, 2017. https://csce2017.ca/
• F.K. Alqahtani, G. Ghataora, M.I. Khan and S. Dirar. “Lightweight concrete containing recycled plastic aggregates.” 2nd International Conference on Smart Materials & Structures, February 29-March 02, 2016, Philadelphia, Pennsylvania, USA. https://www.omicsonline.org/proceedings/lightweight-concrete-containing-recycled-plastic-aggregates-41529.html
• F.K. Alqahtani, G. Ghataora, M.I. Khan and S. Dirar. “lightweight concrete containing recycled plastic aggregates.” UK conference
• M.I. Khan & W. Abbass. “Pullout behavior of single steel fiber with different strengths of concrete.” Concrete Solutions 2016, 6th International Conference on Concrete Repair, 20-23 June 2016, Thessaloniki, Greece.
• M.I. Khan, G. Fares and S. Mourad, “Effect of individual and combined constituents on the rheology of SHCC-based PVA fibers”. Proceedings of the Second International Conference on Infrastructure Management, Assessment and Rehabilitation Techniques (ICIMART’16). March 8 - 10, 2016, Sharjah. UAE.
• M.I. Khan, “High performance cementitious composites: nanostructural and microstructure investigation”. The Fifth International Conference on Construction Materials: Performance, Innovations and Structural Implications. August 19 – 21, 2015, Vancouver, Canada, pp. 788-796.
• M.I. Khan, S. Mourad and G. Fares, “Strain capacity of SHCC using different strain loading rates”. The Fifth International Conference on Construction Materials: Performance, Innovations and Structural Implications. August 19 – 21, 2015, Vancouver, Canada, pp. 1605-1614.
• S. Mourad, A. Charif and M.I. Khan, “Reinforced concrete beams using locally manufactured steel bars: investigation of flexural behavior”. The Eighth International Structural Engineering and Construction Conference. Sydney, Australia, November 23-28, 2015, pp. 25-30.
• M.I. Khan, S. Mourad and G. Fares, “Effect of different natural sands on the tensile behaviour of SHCC under the effect of different strain rates”. The Eighth International Structural Engineering and Construction Conference. Sydney, Australia, November 23-28, 2015, pp. 651-656.
• Fahad K. Alqahtani, Gurmel Ghataora, M. Iqbal Khan, Samir Dirar, Azzedine Kioul and Mansour Al-Otaibi, “Lightweight concrete containing recycled plastic aggregates”. International Conference on Electromechanical Control Technology and Transportation (ICECTT 2015), China, October 2015, pp. 527-533.
• G. Fares, M.I. Khan, “Effect of pore water chemistry on the drying shrinkage of smart concrete”. 14th International Congress on the Chemistry of Cement (ICCC 2015), 13-16 October 2015. Beijing, China.
• M.I. Khan and G. Fares, “Rheology as a key factor affecting the properties of engineered cementitious composites”. The Twenty-third Annual International Conference on Composites/Nano Engineering (ICCE-23). Chengdu, China, July 12-18, 2015.
• M.I. Khan and G. Fares, “Strain hardening composites: rheology of its constituents”. International Conference on Mechatronics and Intelligent Materials (MIM 2015), Hong Kong, China, July 28-29, 2015.
• E. Secrieru. V. Mechtcherine, M.I. Khan, S.M. Mourad, “Effect of temperature variation on rheological properties of strain-hardening cement based composites (SHCC)”, Proceedings of the 1st International Conference on Infrastructure Management, Assessment and Rehabilitation Techniques (ICIMART’14), American University in Sharjah, March 4-6, 2014.
• S.M. Mourad, A. Charif and M.I. Khan, “Flexural behavior of RC beams with local steel -experimental investigation”, International Conference on Construction Materials and Structures (ICCMATS 2014), November 24 – 26, 2014, Johannesburg, South Africa.
• Charif, S.M. Mourad and M.I. Khan, “Flexural behavior of RC Beams with Local steel: analytical investigation”, International Conference on Construction Materials and Structures (ICCMATS 2014), November 24 – 26, 2014, Johannesburg, South Africa.
• M.I. Khan and S.M. Mourad, “New proposed direct tensile strength test for concrete”, International Conference on Construction Materials and Structures (ICCMATS 2014), November 24 – 26, 2014, Johannesburg, South Africa.
• M.I. Khan, “Utilization of industrial waste as a composite cementing materials”, TechConnect World, National Innovation Summit and National SBIR/STTR Conference, Washington DC, June 16-18, 2014,
• M.I. Khan, “Effect of locally manufactured PVA-fiber on the mechanical properties of the cement based fiber reinforced mortar under hot environment”, First International Conference on Mechanics of Composites, Stony Brook University, New York, June 9-12, 2014.
• M.I. Khan, G. Fares, S.M. Mourad, W. Abbass. and V. Mechtcherine, "Production of sustainable strain-hardening cement-based composites using different natural sands" International RILEM conference on Application of superabsorbent polymers and other new admixtures in concrete construction, 14-17 September 2014, Dresden, Germany
• G. Fares, M.I. Khan, S.M. Mourad and W. Abbass, "Fire-resistivity of strain-hardening cement-based composites containing natural sands" International RILEM conference on Application of superabsorbent polymers and other new admixtures in concrete construction, 14-17 September 2014, Dresden, Germany.
• E. Secrieru. V. Mechtcherine, M.I. Khan, S.M. Mourad, “Effect of temperature variation on rheological properties of strain-hardening cement based composites (SHCC)”, Proceedings of the 1st International Conference on Infrastructure Management, Assessment and Rehabilitation Techniques (ICIMART’14), American University in Sharjah, March 4-6, 2014.
• M.I. Khan and W. Abbass, “Effect of length and percentage of date palm leaf fibers on the mechanical properties of fiber reinforced concrete”, UKIERI Concrete Congress- Innovations in Concrete Construction, 5 - 8 March 2013.
• G. Fares and M.I. Khan, “HPC: how it performs under internal sulfate attack and ASR expansion?”, UKIERI Concrete Congress- Innovations in Concrete Construction, 5 - 8 March 2013.
• Fauzi, G. Fares, R. Al-Zaid, A.I. Al-Negheimish, A.M. Al-Hozaimy, M.I. Khan, “EAFD performance compared to conventional supplementary cementitious materials”, The 13th International Conference on QiR (Quality in Research), 25-28 June 2013, Indonesia.
• M.I. Khan, “Thermal energy efficient concrete and applicability of its prediction model, International Congress on Materials and Renewable Energy (MRE 2013)”, 1-3 July 2013, Greece.  
• G. Fares and M.I. Khan, “Effectiveness of HPC mix composition in suppressing ASR expansion”, UKIERI Concrete Congress- Innovations in Concrete Construction, 5 - 8 March 2013.
• M. I. Khan, “Application of artificial neural network for dimensional stability of repair materials under local hot weather”, The 16th International Conference on Computational Methods and Experimental Measurements (CMEM 2013), 2-4 July 2013, Spain.
• M.I. Khan, “Optimization of CH content of ternary cementitious systems and its prediction using artificial neural networks”, RILEM Second International Conference on Microstructure Related Durability of Cementitious Composites, Amsterdam, 11-13 April 2012.
• M.I. Khan and T.H. Almusallam, “Bond characteristics of substrate concrete and repair materials,” Third International Conference on Concrete Repair, Rehabilitation and Retrofitting, Cape Town, South Africa, 3-5 September 2012.
• G. Fares, A. Al-Negheimish, M.I. Khan, R. Al-Zaid and A. Alhozaimy, “Micro-durability of SCC mixtures containing limestone dust and natural pozzolan”, RILEM Second International Conference on Microstructure Related Durability of Cementitious Composites, Amsterdam, 11-13 April 2012.
• M.I. Khan, T.H. Almusallam, & A.A. Almosa, “Evaluation of restrained shrinkage of repair materials under local environment of Riyadh,” Concrete Solutions 2011, 4th International Conference on Concrete Repair, Germany, pp 345-353, September 2011.
• M.I. Khan,  T.H. Almusallam, S.H. Alsayed, Y.A. Al-Salloum & A.A. Almosa, "Benchmarking laboratory investigated locally available cementitious repair materials against their manufacturer’s data sheets,” Concrete Solutions 2011, 4th International Conference on Concrete Repair, Germany, pp 400-408, September 2011.
• M.I. Khan, “Nanostructure and microstructure of cement concrete incorporating multi-cementitious composites", First International Conference in North America on Nanotechnology in Cement and Concrete, Irvine, California, May 5-7, 2010.
• M.I. Khan, S.M. Mourad and W.M. Zahid, “Development of engineering program for ABET accreditation: Case study of civil engineering B.Sc. program at King Saud University”, WCCEE 2010-12th IACEE World Conference on Continuing Engineering Education, Singapore, October 2010, pp. 365-374.
• S.M. Mourad, M.I. Khan and W.M. Zahid, “Assessment and evaluation of the civil engineering B.Sc. program – King Saud University”, WCCEE 2010-12th IACEE World Conference on Continuing Engineering Education, Singapore, October 2010, pp. 375-384.
• M.I. Khan, S.H. Alsayed, T.H. Almusallam, Y.A. Al-Salloum and A. Almosa, "Performance of repair materials for durable concrete structures", Proceedings of the 4th International Conference on Construction Materials: Performance, Innovations and Structural Implications, Japan, pp. 1353-1358, August 2009.
• M.I. Khan, S.H. Alsayed, T.H. Almusallam, Y.A. Al-Salloum and A. Almosa, "Slant shear bond and modulus of rupture of repair materials", Proceedings of the 4th International Conference on Construction Materials: Performance, Innovations and Structural Implications, Japan, pp. 1359-1366, August 2009.
• M.I. Khan, S.H. Alsayed, T.H. Almusallam, Y.A. Al-Salloum and A. Almosa, “Bond strength of cementitious and polymer modified repair materials”, Concrete Solutions 2009, 3rd International Conference on Concrete Repair,  Italy, 29 June- 2 July 2009, pp. 147-151.
• M.I. Khan, “Microstructure of high performance concrete”, Proceedings of the Seventh International Conference on Composite Science and Technology (ICCST/7), American University of Sharjah, UAE, 20–22 January 2009. CD proceedings.
• M.I. Khan, “Mix proportions for high performance concrete using artificial neural networks”, Proceedings of the 3rd International Conference on Modeling, Simulation, and Applied Optimization (ICMSAO'09), American University of Sharjah, UAE, 20-22 January 2009. CD proceedings.
• M.I. Khan, "Rheology of high performance concrete containing cementitious materials", Proceedings of the 8th International Symposium on Utilization of High-Strength and High-Performance Concrete, Japan, October 2008, Vol. I, pp. 264-269.
• M.I. Khan, "Development of high performance concrete using ternary blended systems", Proceedings of the 8th International Symposium on Utilization of High-Strength and High-Performance Concrete, Japan, October 2008, Vol. I, pp. 622-627.
• M.I. Khan, "Nanostructural and microstructural behavior of concrete containing cementitious composites", RILEM Proceedings of the International Conference on Microstructure Related Durability of Cementitious Composites, Nanjing, China, October 2008, pp. 34-41.
• https://www.rilem.net/publication/publication/65?id_papier=2631
• M.I. Khan, "Analytical model for the prediction of strength for high performance concrete, Proceedings of the International Conference Analytical Models and New Concepts in Concrete and Masonry Structures (AMCM’2008), Poland, ACI sponsored, 9-11 June 2008. https://www.tib.eu/en/search/id/TIBKAT%3A633176397/Proceedings-AMCM-2008-6th-International-Conference/
• M.I. Khan, "Hydration mechanism of high strength concrete using cementitious composites", RILEM Proceedings of the International Conference on Microstructure Related Durability of Cementitious Composites, Nanjing, China, October 2008, pp. 127-134.
• https://www.rilem.net/publication/publication/65?id_papier=2641
• M.I. Khan, "Properties of composite cementitious systems and its prediction using artificial neural networks", Proceedings of Structural Engineers World Congress SEWC 2007, 2-7 November 2007, Bangalore, India.
• M.I. Khan, “Porosity of concrete using vacuum-pressure method–a new approach”,  The 4th International Conference on Concrete under Severe Conditions of Environment and Loading (CONSEC 04), Seoul, Korea, June 20 - 23, 2004.
• M.I. Khan, “Application of ANN for the prediction of properties of high performance concrete”, The Seventh International Conference on The Application of Artificial Intelligence to Civil and Structural Engineering, The Netherlands, 2-4 September 2003.
• M.I. Khan and S. Alsayed, “Prediction of chloride permeability of high performance concrete”, International Symposium on Towards a Better Built Environment–Innovation, Sustainability, Information Technology, International Association for Bridge and Structural Engineering (IABSE), Melbourne, 11–13 September 2002.
• M.I. Khan and B.S. Choo, “Optimization of high performance concrete”, The 9th International Conference on Computing in Civil and Building Engineering, Taiwan, 3–5 April 2002, Vol. I, pp. 601-605.
• M.I. Khan, B.S. Choo and S.M. Ahmad, “Application of neural network for concrete durability”, The 9th International Conference on Computing in Civil and Building Engineering, Taiwan, 3–5 Apr 2002, Vol. I, pp. 73-78.
• M.I. Khan, C.J. Lynsdale and B.S. Choo, “Pore structure of high strength cement mortar containing fly ash and microsilica”, Supplementary Proceedings of the ACI/CANMET International Symposium on Sustainable Development of Cement and Concrete, San Francisco, ACI SP 202, USA, 16 – 19 September, 2001, pp. 223 to 236.
• C.J. Lynsdale and M.I. Khan, “Chloride and oxygen permeability of concrete incorporating fly ash and silica fume in ternary systems”, Proceedings of the fifth CANMET/ACI International Conference on Durability of Concrete, American Concrete Institute, Spain, ACI, SP-192, Vol. II, June 2000, pp. 739-753.
• C.J. Lynsdale and M.I. Khan, “High performance-low environmental impact concrete utilising cement replacements in ternary systems”, Proceedings of the Sustainable Construction into the next Millennium: Environmentally Friendly and Innovative Cement based materials, Brazil, November 2000.
• M.I. Khan, C.J. Lynsdale and P. Waldron, “Resistance of concrete containing cement replacing materials to chloride ion penetration”, Proceedings of the 9th BCA Annual Conference on Higher Education and the Concrete Industry, British Cement Association, Cardiff, UK, 1999, pp. 141-147.
• M.I. Khan, C.J. Lynsdale and P. Waldron, “Interaction of PFA and SF - Influence on concrete strength”, Proceedings of the International Conference on Infrastructure Regeneration and Rehabilitation, Improving the Quality of Life through Better Construction – A Vision for the Next Millennium, Sheffield, UK, 28 June – 2 July, 1999, pp. 339-349.
• M.I. Khan and B. Bhattacharjee, “Influence of Aggregate type, porosity and nature of the pores on thermal properties of concrete”, Proceedings of theInternational Conference on Infrastructure Regeneration and Rehabilitation, Improving the Quality of Life through Better Construction – A Vision for the Next Millennium, Sheffield, UK, 28 June – 2 July, 1999, pp. 393-403.
• M.I. Khan, C.J. Lynsdale and P. Waldron, “Optimisation of strength and permeability of triple blended mortars”, Proceedings of the Industrialised Building Systems and Structural Engineering, World Engineering Congress – 1999, Malaysia, 1999, pp. 109-112.
• M.I. Khan and C.J. Lynsdale, “Hydration in ternary blended high-strength cementitious systems using thermogravimetry”, Presented at the Conference on Cement and Concrete Science, The Institute of Materials, Keele University Staffs, UK, September 1999.
• M.I. Khan and C.J. Lynsdale, “The influence of PFA and SF on the compressive strength and porosity of hardened ternary blended cement paste”, Presented at the Conference on Cement and Concrete Science, The Institute of Materials, London, UK, September 1998.
• M.I. Khan and B. Bhattacharjee, “An experimental investigation on influence of aggregate type and moisture content on thermal conductivity of concrete”, Proceedings of the International Conference on Building Envelope Systems and Technology, Singapore, 1994, pp. 522-526.