Microwaves-Based High Sensitivity Sensors for Crack Detection in Metallic Materials
, Ali M. Albishi and Omar M. Ramahi . 2017
This paper presents a highly sensitive sensor for crack detection in metallic surfaces. The sensor is inspired by complementary split-ring resonators which have dimensions much smaller than the excitation's wavelength. The entire sensor is etched in the ground plane of a microstrip line and fabricated using printed circuit board technology. Compared to available microwave techniques, the sensor introduced here has key advantages including high sensitivity, increased dynamic range, spatial resolution, design simplicity, selectivity, and scalability. Experimental measurements showed that a surface crack having 200-μm width and 2-mm depth gives a shift in the resonance frequency of 1.5 GHz. This resonance frequency shift exceeds what can be achieved using other sensors operating in the low GHz frequency regime by a significant margin. In addition, using numerical simulation, we showed that the new sensor is able to resolve a 10-μm-wide crack (equivalent to λ/4000) with 180-MHz shift in the resonance frequency.
This study explores the viability of using the avoided mode crossing phenomenon in the microwave regime to design microwave differential sensors. While the design concept can be applied to any…
his paper presents a novel microstrip patch antenna design using slots and parasitic strips to operate at the n77 (3.3–4.2 GHz)/n78 (3.3–3.8 GHz) band of sub-6 GHz and n96 (5.9–7.1 GHz) band of…