User Image

Nadeem Ahsan Siddiqui

Professor

Ph.D.

كلية الهندسة
2A89, Department of Civil Engineering, King Saud University

+966-11-4676962
nadeem
المنشورات
مقال فى مجلة

Journal Publications (60)

  1. Abbas, H., Siddiqui, N. A., Almusallam, T. H., Abadel, A. A., Elsanadedy, H., & Al-Salloum, Y. A. (2021). Effect of rebar spacing on the behavior of concrete slabs under projectile impact. Structural Engineering and Mechanics, Techno Press, 77(3), 329-342.
  2. Elsanadedy, H. M., Al-Salloum, Y. A., Alrubaidi, M. A., Almusallam, T. H., Siddiqui, N. A., & Abbas, H. (2021). Upgrading of precast RC beam-column joints using innovative FRP/steel hybrid technique for progressive collapse prevention. Construction and Building Materials, Elsevier, 121130.
  3. Khateeb, B. M., Siddiqui, N. A., Almusallam, T. H., Abbas, H., & Al-Salloum, Y. A. (2020). Behavior of novel CFST circular column-to-foundation connections under cyclic loading. Engineering Structures, 221, 111051.
  4. Siddiqui, N., Abbas, H., Almusallam, T., Binyahya, A., & Al-Salloum, Y. (2020). "Compression behavior of FRP-strengthened RC square columns of varying slenderness ratios under eccentric loading." Journal of Building Engineering, Elsevier, 101512.
  5. Siddiqui, N., Alhaddad, M.S., Alanazi, M.A., and Almutairi, K.F. (2019). "Experimental investigation of RC beams reinforced with Saudi steel rebars under different tensile strain limits." Journal of Recent Activities in Infrastructure Science, e-issn: 2582-3124, Vol. 4, Issue 3, pp. 24–38.
    http://doi.org/10.5281/zenodo.3567561. 
  6. Siddiqui, N.A., Al-Salloum, Y.A., Almusallam, T.H., Abadel, A. and Abbas, H. (2018). " Reliability assessment of HFRC slabs against projectile impact," International Journal of Concrete Structures and Materials, Springer, 12:58.
  7. Al-Salloum, Y.A., Al-Amri, G.S., Siddiqui, N.A., Almusallam, T.H. and Abbas, H. (2018).” Effectiveness of CFRP-Strengthening in Improving Cyclic Compression Response of Slender RC Columns,” Journal of Composites for Construction, ASCE, Vol. 22, Issue 3: 04018009.
  8. Almusallam, T.H., Elsanadedy, H., Al-Salloum, Y.A., Siddiqui, N.A., Iqbal, R. (2018). “Experimental and FE investigation on vulnerability of precast RC beam-column joints to progressive collapse”, KSCE Journal of Civil Engineering, pp. 1-16, https://doi.org/10.1007/s12205-018-1518-0.
  9. Tuken, A., Dahesh, M.A. and Siddiqui, N.A. (2017). “Reliability assessment of RC shear wall-frame buildings subjected to seismic loading,” Computers and Concrete, An International Journal, Vol. 20, Issue 6, pp. 719-729.
  10. Elsebaie, I.H. and Siddiqui, N.A. (2017). “Experimental investigation of grain size effect on the temporal variation of local scour around bridge piers,” Journal of Water Resources and Pollution Studies, Vol. 2, Issue 3, pp. 1-9.
  11. Jameel, M., Oyejobi, D.O., Siddiqui, N.A., Ramli Sulong, N.H. (2017). "Nonlinear dynamic response of tension leg platform under environmental loads", KSCE Journal of Civil Engineering, Springer, Vol. 21, Issue 3, pp. 1022-1030.
  12. Abadel, A. Abbas, H., Almusallam, T., Al-Salloum, Y. and Siddiqui, N.A. (2016). “Mechanical properties of hybrid fibre-reinforced concrete–analytical modelling and experimental behaviour”, Magazine of Concrete Research, Institution of Civil Engineers (ICE), UK, Vol. 68 Issue 16, pp. 823-843.
  13. Abadel, A. Abbas, H., Almusallam, T., Al-Salloum, Y. and Siddiqui, N.A. (2016). “Discussion: Mechanical properties of hybrid fibre-reinforced concrete–analytical modelling and experimental behaviour”, Magazine of Concrete Research, Institution of Civil Engineers (ICE), UK, Vol. 68 Issue 22, pp. 1183-1186.
  14. Almusallam, T.H., Abadel, A.A., Al-Salloum, Y.A. Siddiqui, N.A. Abbas, H. (2015)."Effectiveness of hybrid-fibers in improving the impact resistance of RC slabs" International Journal of Impact Engineering, Elsevier, Vol. 81, pp. 61-73.
  15. Tuken A. and Siddiqui, N.A. (2015). “SBC-based assessment of shear wall quantity in moment resisting frame buildings.” KSCE Journal of Civil Engineering, Springer, Vol. 19, Issue 1, pp. 183-199.
  16. Dahesh, M.A. Tuken, A. and Siddiqui, N.A. (2015). “Controlling the earthquake induced lateral displacement of RC buildings using shear walls: Parametric study”, Arabian Journal of Geosciences, Springer, Vol. 8, Issue 11, pp. 9913–9927, doi:10.1007/s12517-015-1903-7.
  17. Siddiqui, N.A., Khateeb, B.M.A., Almusallam, T.H. Al-Salloum, Y.A., Iqbal, R.A. and Abbas, H. (2014). "Reliability of RC shielded steel plates against the impact of sharp nose projectiles," International Journal of Impact Engineering, Elsevier, Vol. 69, pp. 122–135.
  18. Siddiqui, N.A., Khateeb, B.M.A., Almusallam, T.H. and Abbas, H. (2014). "Reliability of double-wall containment against the impact of hard projectiles," Nuclear Engineering and Design, Elsevier, Vol. 270, pp. 143-151.
  19. Siddiqui, N.A., Alsayed, S.H., Al-Salloum, Y.A., Iqbal, R.A. and Abbas, H. (2014). "Experimental investigation of slender circular RC columns strengthened with FRP composites," Construction & Building Materials, Vol. 69, pp. 323–334.
  20. Alsayed, S.H. and Siddiqui, N.A. (2013). "Reliability of shear-deficient RC beams strengthened with CFRP-strips," Construction & Building Materials, Elsevier, Vol. 42, pp. 238-247.
  21. Almusallam, T.H., Siddiqui, N.A., Iqbal, R.A. and Abbas, H. (2013). "Response of hybrid-fiber reinforced concrete slabs to hard projectile impact," International Journal of Impact Engineering, Elsevier, Vol. 58, pp. 17-30.
  22. Tuken A. and Siddiqui, N.A. (2013). "Assessment of shear wall quantity in seismic--resistant design of reinforced concrete buildings." Arabian Journal for Science and Engineering, AJSE B-Engineering, Springer, Vol. 38, No. 10, pp. 2639-2648.
  23. Alhaddad, M.S., Siddiqui, N.A., Abadel, A.A., Alsayed, S.H. and Al-Salloum, Y.A. (2012).  “Numerical investigations on the seismic behavior of FRP and TRM upgraded RC exterior beam-column joints,” Journal of Composites for Construction, ASCE, Vol. 16, No. 3, pp. 308-321.
  24. Muzzammil, M. and Siddiqui, N. A.  (2012). “Reliability-based assessment of scour below spillways.” Water and Energy International, Vol. 69, Issue 2, pp. 43-54. 
  25. Al-Salloum, Y.A., Siddiqui, N.A., Elsanadedy, H.M., Abadel, A.A. and Aqel, M.A. “Textile-Reinforced Mortar (TRM) versus FRP as strengthening material of seismically deficient RC beam-column joints,” Journal of Composites for Construction, ASCE, Vol. 15, No. 6, pp. 920-933.
  26. Al-Salloum, Y.A., Almusallam, T.H., Alsayed, S.H. and Siddiqui, N.A. “Seismic behavior of As-built, ACI-complying and CFRP-repaired exterior RC beam-column joints.” Journal of Composites for Construction, ASCE, Vol. 15, No. 4, pp. 522-534.
  27. Siddiqui, N.A. (2011). "Influence of fluidity on reliability of SCC produced using local Saudi Materials."  Arabian Journal for Science and Engineering, AJSE B-Engineering, Springer, Vol. 36, No. 2, pp. 203-214, DOI 10.1007/s13369-010-0032-6. 
  28. Siddiqui, N.A. “A simplified procedure for reliability estimation of underground concrete barriers against normal missile impact.”  The Journal of Engineering Research, Sultan Qaboos University, Sultanate of Oman, Vol. 8, No. 1, pp. 61-73. 
  29. Alsayed, S.H., Al-Salloum, Y.A., Almusallam, T.H. and Siddiqui, N.A. (2010). "Seismic Response of FRP-upgraded exterior RC beam-column joints.” Journal of Composites for Construction, ASCE, Vol. 14, Issue 2, pp. 195-208. 
  30. Alsayed, S.H., Almusallam, T.H., Al-Salloum, Y.A., and Siddiqui, N.A. (2010).  “Seismic rehabilitation of corner RC beam-column joints using CFRP composites.” Journal of Composites for Construction, ASCE, Vol. 14, Issue 6, pp. 681-692.
  31. Siddiqui, N.A. (2010). “Influence of flexural steel reinforcement ratio on RC beams strengthened with externally bonded FRP sheets.”  Journal of Structural Engineering, JoSE, Structural Engineering Research Center (SERC), Chennai, India, Vol. 37, No. 2, pp. 88-95.
  32. Siddiqui, N.A. Abbas, H. and Makrani, I.A. (2010). “A simplified procedure for reliability assessment of thin circular tubes against axial crushing.”  Journal of Modeling and Simulation in Design and Manufacturing, India, Vol. 1, No. 2, pp. 58-66..
  33. Siddiqui, N.A. (2009). "Experimental investigation of RC beams strengthened with externally bonded FRP composites.” Latin American Journal of Solids & Structures , Vol. 6, Issue 4, 343-362.
  34. Muzzammil, M. and Siddiqui, N. A.  (2009). “Reliability analysis of scour downstream of a ski jump bucket. Water Management, Institution of Civil Engineers, (ICE), UK, Vol. 162, Issue WM6, pp. 389-398.
  35. Muzzammil, M. and Siddiqui, N. A.  (2009). “A reliability-based assessment of bridge pier scour in non-uniform sediments.” Journal of hydraulic Research, International Association of Hydraulic Engineering and Research, Vol. 47, No. 3, pp. 372-380.
  36. Muzzammil, M., Siddiqui, N. A.  Anwer, M. (2009). “A reliability-based scour depth estimation in Indian alluvial rivers.” Water and Energy International, Vol. 66, No. 1 (January-March), pp. 44-55. 
  37. Siddiqui, N.A., Khan, F. H. and Umar, A. (2009). “Reliability of underground concrete barriers against normal missile impact.” Computers and Concrete, An International Journal, Vol. 6, No. 1, pp. 79-93.
  38. Muzammil, M., Siddiqui, N. A. and Siddiqui, A. F. (2008). “Reliability considerations in bridge pier scouring.” Structural Engineering and Mechanics, An International Journal, Vol. 28, No. 1, pp. 1-18.
  39. Ibrahim, S. M., Siddiqui, N. A., and Naqvi, S. Q. A. (2007). “A simple procedure for reliability assessment of thin composite plates against buckling.” Latin American Journal of Solids & Structures, Vol. 4, No. 4, pp. 267-297.
  40. Siddiqui, N.A., Umar, A. and saxena, A. K. (2007). “Non-linear coupled response of TLP under random wave and impulsive forces.” Journal of Structural Engineering, JoSE, Structural Engineering Research Center (SERC), Chennai, India, Vol. 34, No. 5, pp. 369-376.
  41. Kamruzzamman, M., Umar, A., Naqvi, S. Q. A. and Siddiqui, N. A. (2006). “Effect of composite type and its configuration on buckling strength of thin laminated composite plates.” Latin American Journal of Solids & Structures, Vol. 3, No.3, pp. 279-299.
  42. Siddiqui, N. A., Kumar, S., Khan, M. A. and Abbas, H. (2006). “A simplified procedure to incorporate soil nonlinearity in missile penetration problems.” Structural Engineering and Mechanics, An International Journal, Vol. 23, No. 3, pp. 249-262.
  43. Khan, R.A., Siddiqui, N. A., Naqvi, S.Q.A. and Ahmad, S. (2006). “Reliability analysis of TLP tethers under impulsive loading.” Reliability Engineering and System Safety, Elsevier Science, Vol. 91, No. 1, pp. 73-83.
  44. Muzzammil, M., Siddiqui, N. A. and Siddiqui, A. F. (2006). “A reliability analysis of bridge pier against local scour.” Water and Energy International, Vol. 63, No. 2, pp. 33-42.
  45. Siddiqui, N. A., Jameel, M., Umar, A. and Ahmad, S. (2005). “Nonlinear coupled response of tension leg platform.” Advances in Vibration Engineering, Vol. 4, No. 1, pp. 67-82.
  46. Shah, A. A., Umar, A. and Siddiqui, N. A. (2005). “A methodology for assessing the reliability of taut and slack mooring systems against instability.” Ocean Engineering, Elsevier Science, Vol. 32, No. 10, pp. 1216-1234.
  47. M.A. Khan, Siddiqui, N. A. and Abbas, H. (2004). “Reliability analysis of latticed steel towers against wind induced displacement.” Steel and Composite Structures, An International Journal , Vol. 4, No.1, pp. 9-21.
  48. Anver, N., Umar, A. and Siddiqui, N. A. (2004). “Effect of geometric nonlinearity on the response behavior of multipoint mooring system.” Advances in Vibration Engineering, Vol. 3, No. 3, pp. 220-234.
  49. Siddiqui, N. A. and Ahmad, S. (2003). “Reliability of TLP tethers under extreme tensions.” Structural Engineering and Mechanics, An International Journal, Vol.16, No. 3, pp.317-326.
  50. Siddiqui, N. A., Iqbal, M.A., Abbas, H. and Paul, D.K. (2003). Reliability analysis of nuclear containment without metallic liners against jet aircraft crash.” Nuclear Engineering and Design, Elsevier Science, Vol. 224, No. 1, pp. 11-21.
  51. Siddiqui, N. A. and Ahmad, S. (2003). “Dynamic behavior of tension leg platform under impulsive loading.” Defence Science Journal, DRDO, India, Vol.53, No.2, pp. 205-210.
  52. Khan, U. Siddiqui, N. A., Umar, A. and Abbas, H. (2003). “Local damage of plain and reinforced concrete targets under impact load.” Defence Science Journal, DRDO, India, Vol.53, No.1, pp. 67-73.
  53. Umar, A. and Siddiqui, N. A. (2002). “Reliability analysis of a moored vessel.” Journal of Structural Engineering, JoSE, Structural Engineering Research Center (SERC), Chennai, India, Vol. 29, No. 3, pp. 171-174.
  54. Siddiqui, N. A., Choudhury, M. and Abbas, H. (2002). “Reliability analysis of projectile penetration into geological targets.” Reliability Engineering and System Safety, Elsevier Science, Vol.78, No. 1, pp.13-19.
  55. Choudhury, M., Siddiqui, N. A. and Abbas, H. (2002). “Reliability analysis of buried concrete target under missile impact.” International Journal of Impact Engineering, Elsevier Science, Vol. 27, No. 8, pp.791-806.
  56. Siddiqui, N. A. and Abbas, H. (2002). “Mechanics of Missile penetration into geomaterials.” Structural Engineering and Mechanics, An International Journal, Vol.13, No. 6, pp.639-652.
  57. Amanullah, M., Siddiqui, N. A., Umar, A. and Abbas, H. (2002).“Fatigue reliability analysis of welded joints of a TLP tether system.” Steel and Composite Structures: An International Journal, Techno Press, Vol. 2, No.5, pp. 331-354.
  58. Siddiqui, N. A. and Ahmad, S. (2001). “Fatigue and fracture reliability of TLP tethers under random loading.” Marine Structures, Elsevier Science, Vol. 14, No. 3, pp. 331-352.
  59. Siddiqui, N. A. and Ahmad, S. (2000). “Reliability analysis against progressive failure of TLP tethers in extreme tension.” Reliability Engineering and System Safety, Elsevier Science, Vol. 68, pp. 195-205.
  60. Ahmad, S., Islam, N. and Siddiqui, N. A. (1997). “Wind-induced response of double articulated towers.” Journal of Wind Engineering and Industrial Aerodynamics, Elsevier Science, Vol 67-68, p. 937.
مزيد من المنشورات
publications
System and method for connecting a square concrete-filled steel tubular column to a reinforced concrete footing
بواسطة Abbas, Husain, Nadeem A. Siddiqui, Baha MA Khateeb, Tarek H. Almusallam, and Yousef A. Al-Salloum
2023
publications
Fiber reinforced composite system for strengthening of wall-like RC columns and Methods for preparing such system
بواسطة Al-Salloum YA, Abbas H, Alsayed SH, Siddiqui NA
2017
publications
Fiber reinforced composite system for strengthening of wall-like RC columns and methods for preparing such system
بواسطة Al-Salloum YA, Abbas H, Alsayed SH, Siddiqui NA
2017