PUBLISHED/ACCEPTED PAPERS

International Journals (SCI publication)

1.  Hany S. Abdo, Khalil Abdelrazek Khalil, Salem S. Al-Deyab, Hamoud Altaleb, and El-Sayed M. Sherif, Antibacterial Effect of Carbon Nanofibers Containing Ag Nanoparticles, Fibers and Polymers 0000, Vol.0, (2013), No.0, 1-8

2. Nasser A. M. Barakat1, Khalil Abdelrazek Khalil, Ahmad G. El-Deen, Hak yong kim, Development of Cd-doped Co Nanoparticles En- capsulated in Graphite Shell as Novel Electrode Material for the Capacitive Deionization Technology, Nano-Micro Lett. 5(4), 303-313 (2013)/ http://dx.doi.org/10.5101/nml.v5i4 p303-313.

3. Ahmed G. El-Deen, Nasser A. M. Barakat, Khalil Abdelrazek Khalild and Hak Yong Kim, Hollow carbon nanofibers as an effective electrode for brackish water desalination using the capacitive deionization process, New J. Chem., 2014, 38, 198—205.

4. Nasser A.M. Barakat, Moaaed Motlak, Ahmed A. Elzatahry, Khalil Abdelrazek Khalil, Emad A.M. Abdelghani, NixCo1-x alloy nanoparticle-doped carbon nanofibers as effective non-precious catalyst for ethanol oxidation, International Journal of Hydrogen Energy, 2013, 1-12

5. El-Sayed M. Sherif, Abdulhakim A. Almajid, Khalil Abdelrazek Khalil, Harri Junaedi and F. H. Latief, Electrochemical Studies on the Corrosion Behavior of API X65 Pipeline Steel in Chloride Solutions, Int. J. Electrochem. Sci., 8 (2013) 9360 – 9370.

6. Nasser A.M. Barakat, Ahmed A. Elzatahry, Khalil Abdelrazek Khalil, Synthesis and characterization of Co–Mn–O nanofibers supported on a graphite disk: Novel strategy for nanofibers immobilization, Materials Research Bulletin 49 (2014) 503–508.

7. Khalil Abdelrazek Khalil, H. Fouad, T. Elsarnagawy, F. Almajhadi, Preparation and Characterization of Electrospun PLGA/silver Composite Nanofibers for Biomedical Applications, Int. J. Electrochem. Sci., 8 (2013) 3483 – 3493.

8. H. Fouad, T. Elsarnagawy, Fahad N. Almajhdi, and Khalil Abdelrazek Khalil, Preparation and In Vitro Thermo-Mechanical Characterization of Electrospun PLGA Nanofibers for Soft and Hard Tissue Replacement, Int. J. Electrochem. Sci., 8 (2013) 2293 – 2304.

9. Ehab A. El-Danaf, Mahmoud S. Soliman, Abdulhakim A. Almajid, and Khalil Abdelrazek Khalil, Mechanical Characterization of Cryomilled Al Powder Consolidated by High-Frequency Induction Heat Sintering, Advances in Materials Science and Engineering, Volume 2013, Article ID 397351, 10 pages http://dx.doi.org/10.1155/2013/397351.

10. Magdy M. El Rayes, Hany S. Abdo, and Khalil Abdelrazek Khalil, Erosion - Corrosion of Cermet Coating, Int. J. Electrochem. Sci., 8 (2013) 1117 – 1137.

11. Gopal Panthi, Nasser A. M. Barakat, Khalil Abdelrazek Khalil, Encapsulation of CoS Nanoparticles in PAN Electrospun Nanofibers: Effective and Reusable Catalyst for Ammonia Borane Hydrolysis and Dyes Photodegradtion, Ceramics International, 39, (2013), 1469-1476.

12. Gopal Panthi, Ayman Yousef, Nasser A. M. Barakat, Khalil Abdelrazek Khalil, Mn2O3/TiO2 nanofibers with Broad-Spectrum Antibiotics Effect and Photocatalytic Activity for Preliminary Stage of Water Desalination, Ceramics International, 39 (2013), 2239-2246.

13. Ahmed G. Eldeen, Nasser A.M. Barakat, Khalil Abdelrazek Khalil, Hak Yong Kim,  Development of Multi-channels Carbon Nanofibers as Effective Electrosorpitive Electrodes for Capacitive Deionization Process, Journal of Materials Chemistry A, 2013, 1 (36), 11001 – 11010.

14. Mahir Es-saheb, El-Sayed M. Sherif, Ahmed El-Zatahry, Magdy M. El Rayes,  Khalil Abdelrazek Khalil, Corrosion Passivation in Aerated 3.5% NaCl solutions of Brass by Nanofiber Coatings of Polyvinyl Chloride and Polystyrene, Int. J. Electrochem. Sci., 7 (2012) 10442 – 10455.

15. Khalil Abdelrazek Khalil, Abdulhakim A. Almajid, Ehab A. El-Danaf, Magdy M. El Rayes and  El-Sayed M. Sherif, Direct Fabrication of Yttrium Aluminium Garnet Nanofibers by Electrospinning, Int. J. Electrochem. Sci., 7 (2012) 12218 – 12226.

16. Khalil Abdelrazek Khalil, A New-Developed Nanostructured Mg/HAp Nanocomposite by High Frequency Induction Heat Sintering Process IOP Science: Materials Science and Engineering 40 (2012) 012031 doi:10.1088/1757-899X/40/1/012031

17. Gopal Panthi, Nasser A. M. Barakat, A. M. Hamza, Afeesh R. Unnithan, Moaaed Motlak, Khalil Abelrazik Khalil "Polyaniline-Poly(vinyl acetate) Electrospun Nanofiber Mats as Novel Organic Semiconductor Material", Science of Advanced Materials, Vol. 4, pp. 1–9, 2012, (www.aspbs.com/sam)

18. Nasser A.M. Barakat, Khalil Abdelrazek Khalil, Hak Yong Kim, Toward facile synthesizing of diamond nanostructures via nanotechnological approach: Lonsdaleite carbon nanofibers by electrospinning, Materials Research Bulletin 47 (2012) 2140–2147.

19. Ayman Yousef, Nasser A.M. Barakat, Khalil Abdelrazek Khalil, Photocatalytic release of hydrogen from ammonia borane-complex using Ni(0)-doped TiO2/C electrospun nanofibers, Colloids and Surfaces A: Physicochem. Eng. Aspects 410 (2012) 59– 65.

20. Ehab A. El-Danaf, Khalil Abdelrazek Khalil, Mahmoud S. Soliman, Effect of equal-channel angular pressing on superplastic behavior of eutectic Pb–Sn alloy, MATERIALS AND DESIGN 34 (2012) 235–241.

21. Khalil Abdelrazek Khalil, Abdulhakim A. Almajid, Effect of high-frequency induction heat sintering conditions on the microstructure and mechanical properties of nanostructured magnesium/hydroxyapatite nanocomposites, Materials and Design 36 (2012) 58–68.

22. M. A. Abu-Saied, Khalil Abdelrazek Khalil, Salem S. Al-Deyab, Preparation and Characterization of Poly Vinyl Acetate Nanofiber Doping Copper Metal, Int. J. Electrochem. Sci., 7 (2012) 2019 – 2027.

23. Khalil Abdelrazek Khalil, El-Sayed M. Sherif and Abdulhakim A. Almajid,  Corrosion Passivation in Simulated Body Fluid of Magnesium/Hydroxyapatite Nanocomposites Sintered by High Frequency Induction Heating, Int. J. Electrochem. Sci., 6 (2011) 6184 – 6199.

24. Elsayed E. Hafez1, M. R. El-Aassar, Khalil Abdelrazek Khalil, Salem S. Al-Deyab and Tarek H. Taha, Poly (acrylonitrile-co-methyl methacrylate) nanofibers grafted with bio-nanosilver particles as antimicrobial against multidrug resistant bacteria, African Journal of Biotechnology Vol. 10(84), pp. 19658-19669, 26 December, 2011. Available online at http://www.academicjournals.org/AJB, DOI: 10.5897/AJB11.2426.

25. G.T. Abdel-Jaber1, A. M. Omran, Khalil Abdelrazek Khalil , M. Fujii , M.Seki, and A.Yoshida, An Investigation into Solidification and Mechanical Properties behavior of Al-Si Casting Alloys, International Journal of Mechanical & Mechatronics Engineering IJMME-IJENS Vol: 10 No: 04 34. 2011

26. Khalil Abdelrazek Khalil, Sug Won Kimb , Kwan Woo Kim, N. Dharmaraj, and Hak Yong Kim, A Novel Bio-nanocomposites Composed of Hydroxyapatite Reinforced with TiO2 Electrospun Nanofiber Consolidated Using High Frequency Induction Heating, INTERNATIONAL JOURNAL OF APPLIED CERAMIC TECHNOLOGY 8 (3):523-531 2011.

27. Khalil Abdelrazek Khalil, Abdulhakim A. Almajed, Mahmoud S. Soliman, Effect of Hydroxide Ion Concentration on the Morphology of the Hydroxyapatite Nanorods Synthesized Using Electrophoretic Deposition, Materials Sciences and Applications, 2011, 2, 105-110

28. Nasser A. M. Barakat, Khalil A. Khalil, et. al, CoNi Bimetallic Nanofibers by Electrospinning: Nickel-Based Soft Magnetic Material with Improved Magnetic Properties, J. Phys. Chem. C, 2010, 114 (37), pp 15589–15593

29. S.W. Kim, S.L. Cockcroft, K. A. Khalil, and K. Ogi, Sintering behavior of ultra-fine Al2O3–(ZrO2 + X mol% Y2O3) ceramics by high-frequency induction heating, Materials Science and Engineering A 527 (2010) 4926–4931.

30. Nasser A.M. Barakat, K.A. Khalil, Faheem A. Sheikh, et. al., Physiochemical characterizations of hydroxyapatite extracted from bovine bones by three different methods: Extraction of biologically desirable Hap, Materials Science and Engineering C 28 (2008) 1381–1387.

31. Shanta Raj Bhattarai, Khalil Abdel-razek Khalil, Montasser Dewidar, Pyoung Han Hwang, Ho Keun Yi, and Hak Yong Kim "A Novel Production Method and in-vitro Cell Compatibility of Porous Ti-6Al-4V Alloy Disk for Hard Tissue Engineering" Journal of biomedical materials research. Part A 2008; 86(2):289-99. 

32. Khalil Abdelrazek Khalil, Sug Won Kim and Hak Yong Kim, Consolidation and mechanical properties of nanostructured hydroxyapatite–(ZrO2 + 3 mol% Y2O3) bioceramics by high-frequency induction heat sintering, MATERIALS SCIENCE AND ENGINEERING A, 456 (1-2):368-372 2007.

33. S. W. Kim, K. A. Khalil and K. Ogi, High-Frequency Induction Heat Sintering of Ultra-Fine Al2O3-(ZrO2+X%Mol Y2O3) Bioceramics, Advanced Materials Research Vols. 29-30 (2007) pp. 235-238 online at http://www.scientific.net

34. Khalil Abdelrazek Khalil and Sug Won Kim, High-Frequency Induction Heating Sintering Of Hydroxyapatite-(Zro2+3%Mol Y2o3) Bioceramics, Materials Science Forum Vols. 534-536 (2007) pp. 601-604, online at http://www.scientific.net

35. Khalil Abdelrazek Khalil and Sug Won Kim, Synthesis and Densification of Ultra-Fine Al2o3-(Zro2+3%Mol Y2o3) Bioceramics by High-Frequency Induction Heat Sintering, Materials Science Forum Vols. 534-536 (2007) pp. 1033-1036.

36. Khalil Abdelrazek Khalil, Sug Won Kim, and Hak Yong Kim, Observation of Toughness Improvements of the Hydroxyapatite Bioceramics Densified by High-Frequency Induction Heat Sintering, INTERNATIONAL JOURNAL OF APPLIED CERAMIC TECHNOLOGY 4 (1):30-37 2007

37. Khalil Abdelrazek Khalil, Sug Won Kim, N. Dharmaraj, Kwan Woo Kim and Hak Yong Kim, Novel Mechanism to Improve Toughness of the Hydroxyapatite Bioceramics Using High-Frequency Induction Heat Sintering, JOURNAL OF MATERIALS PROCESSING TECHNOLOGY 187-188, 417-420 2007

38. Khalil Abdelrazek Khalil and Sug Won Kim, Mechanical Wet-Milling and Subsequent consolidation of Ultra-Fine Al2O3-(ZrO2+3%Mol Y2O3) Bioceramics by using High-Frequency Induction Heat Sintering, Trans. Nonferrous Met. Soc. China, 17(2007) 21-26.

 

International conferences
50. A. M. Talat, T. M. Salem, Y. M. Ismail and Khalil A. Khalil, An Investigation into the Production of Al/Fe and Al/Sic Compacts Using Compaction Technique, Al-Azhar Engineering Fourth International Conference, December 16-19, 1995.
51. Khalil A. Khalil, Baiyun Huang and Yimin Li, Factors affecting powder injection molding compacts shape retention during debinding process. Int. Conference Proceeding, organized by Innovative Material Solution Inc. and The Pennsylvania State Univ., State college, PA, USA, 2000.http://www.outreach.psu.edu/C&I/PIM/Tuesday.html
52. Khalil A. Khalil, Baiyun Huang and Yimin Li, A Microstructure Study of injection molded 17-4 ph stainless steel compacts during debinding process, 4th IEC, Faculty of Engg. Mansoura Univ., 20 – 22 April 2004. http://conf.mans.edu.eg/back_conf/040422_iec4/
53. Khalil A. Khalil, and M. M. Dwaidar, Effect of Processing Parameters on the PIM Compacts Shape Retention during Debinding Process, 4th IEC, Faculty of Engg., Mansoura Univ., 20 – 22 April 2004. http://conf.mans.edu.eg/back_conf/040422_iec4/
54. M. M. Dwaidar and Khalil A. Khalil, An Overview of Direct and Indirect Selective Laser Sintering of Metals and Ceramics, Proceeding of International Conference of Mechanical and Automotive Technologies 2005, ICMAT 2005, Jinsoodang Chonbuk National Univ., June 13, 2005, Jeonju, S. Korea, http://www.icmat2005.com/
55. M. M. Dwaidar and Khalil A. Khalil, A Comparison Between Indirect and Direct Selective Laser Sintering of Metals, Proceeding of International Conference of Mechanical and Automotive Technologies 2005, ICMAT 2005, Jinsoodang Chonbuk National Univ., June 13, 2005, Jeonju, S. Korea, http://www.icmat2005.com/ .
56. Sug-Won Kim, Jin-Sung Park, Khalil A Khalil, Wear and Heat Characterization of both the As-Cast and Heat Exposed Specimens for Al/SiCp Composites, AFC-9, Asian Foundrymen Society, Hanoi, Vietnam, Oct.  15~17, 2005.  
57. Khalil A. Khalil and Sug Won Kim, Rapid sintering of Al2O3-8YSZ bioceramic composites by high-frequency induction heating, Proceeding of International Conference of Fracture Mechanics 2005: Multiscale Damage Related to Environment Assisted Cracking, Zhengzhou, Henan, China, November 3-4, 2005. http://chemech.ecust.edu.cn/FM2005/
58. M. M. Dwaidar and Khalil A. Khalil, Processing and mechanical properties of porous 316L stainless steel for artificial hip joints, Proceeding of International Conference of Fracture Mechanics 2005: Multiscale Damage Related to Environment Assisted Cracking, Zhengzhou, Henan, China, November 3-4, 2005, http://chemech.ecust.edu.cn/FM2005/
59. Khalil A. Khalil and Sug Won Kim, Densification of ZTA bioceramic composites by high-frequency induction heating, Proceeding of the 4th Korean-Sino conference on Advanced Manufacturing Technology, Oct 31- November 3, 2005 Jeonju, South Korea.

Local Journals
60. Sug-Won Kim, Jin-Sung Park, Khalil A Khalil, The Effects of Heat-Treatments on the Mechanical Characteristics of High Chromium Cast Irons, Korean Foundry men's society, 19th Nov., 2004, pp. 150. (In Korean) http://www.kfs.or.kr/
61. Sug-Won Kim, Jin-Sung Park, Khalil A Khalil, The Effects of the Microstructure on the Wear Characteristics of Cast Iron, Korean Foundrymen's society, 19th Nov., 2004, pp. 151. (In Korean) http://www.kfs.or.kr/
62.  Sug-Won Kim, Jin-Sung Park, Khalil A Khalil, Effects of C, Si and RE on Microstructures of DCI using Permanent Mold Casting, Korean Foundrymen's society, Vol. 26, No. 4 (2006) 147-179 (In Korean) http://www.kfs.or.kr/
63. K. A. Khalil, M. M. El-Sayed Seleman, G. T. Abdel-Jaber, and M. K. Hassan, “Mechanical properties and wear resistance of 17-4 PH stanless steel compacts” Journal of Engineering Sciences, Assiut university, Vol. 33, No 4, PP. 1431-1441, July 2005. http://www.aun.eun.eg/

BOOK CHAPTER

Book title: Ceramic Materials - Progress in Modern Ceramics (ISBN 978-953-51-0476-6) Chapter title: Advanced Sintering of Nano-ceramic Materials Authors: Khalil Abdelrazek Khalil, InTech Open Access Company, Book edited by: Dr. Feng Shi.

PATENT

1. U. S Patent application, "In-Situ Combustion Synthesis of TiC Reinforced Aluminium Matrix Composites", Reference: 3375D-0020.
2. Europe - Proposed Patent Application, Method of Ultra-High-Strength Nonferrous Matrix Nanocomposite Foams, Our Ref. K10927EP  K10927EP, King Saud University