Influence of 5‑ammonium valeric acid iodide additive on the structural and optical behaviors of methylammonium lead tri-iodide perovskite thin films
Methylammonium lead tri-iodide, (AVAI)x(MAPbI3)1-x (x = 0, 0.05, 0.1, 0.15, 0.25) perovskite thin films were formed using a spin coating method in a glove box beneath an argon environment. The structures of the formed films were investigated using the X-ray diffraction technique. The effect of AVAI amount on the intensity of diffraction peaks was explored. Film with 15% AVAI has the highest optical absorbance. The transmittance of the film 25% AVAI was enhanced as compared with undoped film in the wavelength range up to 1700 nm but it decreased beyond this range. The optical band gap energy (Eg) value of MAPbI3 is 1.58 eV. The direct and indirect Eg values of the films became 1.52–1.59 or 1.31–1.49 eV depending on the amount of AVAI on the films, respectively. Various specified models were used to determine the refractive index (n) of different films. The n-average rose from 2.95 (based on direct Eg value) or 2.99 (based on indirect Eg) for the film (x = 0) to 2.98 (based on direct Eg value) or 3.08 (based on indirect Eg) for the film with 15% AVAI. Film with 15% AVAI has the highest dielectric value, while film with 25% AVAI has the maximum dielectric loss value as compared with MAPbI3 and other dopant ratios. Film with 25% AVAI has the highest optical conductivity value. The film with 15% AVAI showed significant gains in nonlinear optical (NLO) parameter values, making it a suitable option for a variety of NLO and future photonic uses. We studied the photoluminescence features of different films using a 532 nm laser excitation wavelength.
. The CeO2 impregnated carbon nanocomposite was fabricated using the simple ultrasonic dispersion method. The confirmation of elemental, structural and surface properties blended in the materials…
This research numerically investigates the dynamic responses of carbon nanotube-reinforced polymeric composite (CNTRPC) with uncertain material properties. The numerical solutions are obtained…
The total cost of assembly is a critical factor in robotic assembly line balancing, as it encompasses all the costs associated with the assembly line, including initial costs, setup, maintenance,…